| Railroad Tie |
Article Index for Railroad |
Website Links For Railroad |
Information AboutRailroad Tie |
| CATEGORIES ABOUT RAILROAD TIE | |
| rail infrastructure | |
|
A railroad tie, '''cross tie''', or '''railway sleeper''' is a rectangular object used as a base for Railroad Tracks . Sleepers are members generally laid transverse to the rails, on which the rails are supported and fixed, to transfer the loads from rails to the ballast and sub grade below, and to hold the rails to the correct Gauge . Traditionally, ties have been made of Wood , but Concrete is now widely used, Steel has been used, and Plastic has been tried. Ties are normally laid on top of Track Ballast , which supports and holds them in place, and provides drainage and flexibility. Heavy crushed Stone is the normal material for the ballast, but on lines with lower speeds and weight, Sand , Gravel , and even ash from the fires of coal-fired steam locomotives have been used. WOODEN SLEEPERS Timber sleepers are usually of a variety of Hardwood s, and are often heavily Creosote d or, less often, treated with other Preservatives . The problems with wood are its tendency to rot, particularly near the points where they are fastened to the rails. The timber industry has responded to decreased use of timber by promoting its advantages. Railway Tie Association CONCRETE SLEEPERS Concrete sleepers have become more common mainly due to greater economy and better support of the rails under heavy traffic. In the early period railway history, wood was the only material used for making sleepers in Europe. Even in those days, occasional shortages and increasing cost of wood posed problems. This induced engineers to seek alternatives to wooden sleepers. As concrete technology developed in the 19th century, concrete established its place as a versatile building material and could be adapted to meet the requirements of railway industry. In 1877, Mr. Monnier, a French gardener and inventor of reinforced concrete, suggested that cement concrete could be used for making sleepers for the railway track. Monnier in fact designed a sleeper and obtained a patent for it, but it did not work successfully. The designs were further developed and the railways of Austria and Italy produced the first concrete sleepers around the turn of the 20th century. This was closely followed by other European railways. Major progress, however, could not be achieved until World War II when, due to material shortages, wooden sleepers practically disappeared from the markets. Almost simultaneously, as a result of extensive research carried out on French and other European railways, the modern concrete sleeper was developed. Heavier rail sections and long welded rails were also being produced. These rails necessitated higher-quality sleepers. These conditions spurred the development of concrete sleepers in countries such as France , Germany and Britain , where the technology was perfected. STEEL SLEEPERS Steel sleepers, which are relatively light in weight, are sometimes used for sidings and temporary tracks. In the first half of the twentieth century, "Jubilee" track (prefabricated two-foot gauge track with steel sleepers) was widely used in the UK by contractors working on large civil engineering projects. PLASTIC SLEEPERS In more recent times, a number of companies are selling railroad ties manufactured with recycled plastic materials. These ties are said to outlast the classic wooden tie, being practically impervious to environmental stress while otherwise exhibiting properties similar to their wooden counterparts in terms of damping impact loads, lateral stability, and sound absorption. These products have gained limited acceptance by railroads. FASTENING RAILS TO SLEEPERS Spiker in operation in Prairie Du Chien, Wisconsin , August 8 2004 . The machine is driving spikes on both sides of the rails after the ties were replaced.]] Sleepers are laid across the grade at intervals of about two feet. The rails are then laid atop the ties, perpendicular to them. If the ties are wood, Cleats are laid down and either spikes or bolts driven through them into the ties to clamp down the rails. Historically, railroads with American-inspired technology have used driven Rail Spike s to hold the rail to the sleeper while European railways favor square-headed bolts that are screwed into the wood. For concrete ties, Steel Clip s (for example the Pandrol Clip ) are often used to fasten the rails. After this is done, additional ballast is then added to fill the spaces between and around the ties to anchor them in place. The ties then act as anchors and spacers for the rails, while providing a slight amount of give to accommodate weather and settling. The ties are "floating" in the top of the ballast. Failure of a single tie is generally insignificant to the usability and safety of the rails. Some railroads used a " Datenail " coded to identify the age of the railroad tie (that was usually laid down in sections) by hammering it into the railroad tie after installation for maintenance purposes. A typical Mile of rail contains approximately 3,000 ties. OTHER USES In recent years, wooden railroad ties have also become very popular for Gardening and Landscaping , both in creating Retaining Wall s and raised-bed gardens, and sometimes for building steps as well. Traditionally, the ties sold for this purpose are decommissioned ties taken from rail lines when replaced with new ties, and their lifespan is often limited due to rot. Some entrepreneurs sell new ties. However, due to the presence of wood Preservative s such as Coal Tar , Creosote or Salt s of Heavy Metals , railroad ties introduce an extra element of Soil Pollution into gardens and are avoided by many Property owners. In the UK , new Oak beams of the same size as standard railroad ties, but not treated with dangerous chemicals, are now available specifically for garden construction. They are about twice the price of the recycled product. In some places, railroad ties have been used in the construction of homes, particularly among those with lower incomes, especially those residing near railroad tracks, including railroad employees. They are also used as Cribbing for Docks and Boathouses . REFERENCES SEE ALSO
|
|
|