| Isometric Projection |
Article Index for Isometric |
Information AboutIsometric Projection |
| CATEGORIES ABOUT ISOMETRIC PROJECTION | |
| descriptive geometry | |
| infographics | |
| isometric video games | |
| technical drawing | |
|
Isometric projection is a form of Graphical Projection — more specifically, an Axonometric Projection . It is a method of Visually Representing Three-dimensional Objects in two dimensions, in which the three axes of space appear equally foreshortened, of which the displayed angles among them and also the scale of foreshortening are universally known, and each angle between two of the three Axes is 120°. Isometric projection is one of the projections used in Drafting Engineering Drawings . In creating a final, isometric instrument drawing, in most cases a full-size scale, i.e., without using a foreshortening factor, is employed to good effect because the resultant distortion is difficult to perceive. A problem with isometric projection is that, because the lines representing each dimension are parallel on the page, objects do not appear larger or smaller as they extend closer or farther to or from the viewer. VISUALIZATION on a CCD ]] Isometric projection dictates the direction of viewing in that the angles between the projection of the ''x'', ''y'', and ''z'' Axes are all the same, or 120°. For objects with surfaces that are substantially perpendicular to and/or parallel with one another, it corresponds to rotation of the object or camera by approximately +/- 35.264° arcsin(tan(30°)) about the horizontal axis, followed by rotation of +/- 45° about the vertical axis starting from an orthographic projection relative to an object's face (a perpendicular view to a face of an object). Isometric projection can be visualized by considering the view of a cubical room from an upper corner, looking towards the opposite lower corner. The ''x''-axis is diagonally down and right, the ''y''-axis is diagonally down and left, and the ''z''-axis is straight up. Depth is also shown by height on the image. Lines drawn along the axes are at 120° to one another. The term ''isometric'' comes from the Greek for "equal measure", reflecting that the Scale along each axis of the projection is the same (this is not true of some other forms of graphical projection). LIMITS OF ISOMETRIC PROJECTION A problem with isometric projection is that because the lines representing each dimension are parallel on the page, objects do not appear larger or smaller as they extend closer to the viewer. While advantageous for architectural drawings and Sprite -based Video Game s, this can easily result in situations where depth and altitude are impossible to gauge, as is shown in the illustration to the right. Most contemporary video games have avoided this situation by dropping isometric projection in favor of Perspective 3D rendering utilizing vanishing points. Some of the famous "impossible architecture" works of M. C. Escher exploit this isometric limitation. '' Waterfall '' (1961) is a good example, in which the building is isometric but the faded background is not. "ISOMETRIC" PROJECTION IN VIDEO GAMES AND PIXEL ART . Note the 2:1 pixel pattern ratio in this zoomed-in image.]] In the fields of Computer And Video Games and Pixel Art , axonometric projection has been popular because of the ease with which 2D sprites and Tile-based graphics can be made to represent a 3D gaming environment. Because objects don't change size as they move about the game field, there is no need for the computer to scale sprites or do the calculations necessary to simulate Visual Perspective . This allowed older 8-bit and 16-bit game systems (and, more recently, Handheld systems) to portray large 3D areas easily. While the depth confusion problems illustrated above can sometimes be a problem, good game design can alleviate this. With the advent of more powerful graphics systems, axonometric projection is becoming less common. Blurring of the definition The projection used in videogames usually deviates slightly from "true" isometric due to the limitations of could, however, yield different angles, including true isometric.) It should therefore be noted that this form of projection is more accurately described as a variation of Dimetric Projection , since only two of the three angles between the axes are equal (116.565°, 116.565°, 126.87°). Many in video game and pixel art communities, however, continue to mistakenly refer to this projection—as well as other forms of axonometric projection—as "isometric perspective"; the term " 3/4 Perspective " is also commonly used. More blurring Increasingly, the term is being applied to games that don't use any form of axonometric projection. Games that use " might be more appropriate. NOTABLE EXAMPLES OF "ISOMETRIC" COMPUTER AND VIDEO GAMES ).]]
REFERENCES SEE ALSO EXTERNAL LINKS
|
|
|