| Digital Tv |
Article Index for Digital |
Articles about Digital Television |
Website Links For Digital Television |
Information AboutDigital Tv |
|
TECHNICAL INFORMATION Formats and bandwidth In current practice, HDTV uses one of two formats: 1280 × 720 Aspect Ratio . (Some televisions are capable of receiving an HD resolution of 1920 × 1080 at a 60Hz progressive scan frame rate—known as 1080p60 —but this format is not standard and no broadcaster is able to transmit these signals over the air at acceptable quality.) Standard definition TV, by comparison, may use one of several different formats taking the form of various aspect ratios, depending on the technology used in the country of broadcast. For broadcasts, the 704 × 480 (rescaled to 848 × 480) format is used in NTSC countries, while 704 × 576 (rescaled to 1024 × 576) is used in PAL countries. A broadcaster may opt to use a standard-definition digital signal instead of an HDTV signal, because current convention allows the bandwidth of a DTV channel (or " Multiplex ") to be subdivided into multiple Subchannels , providing multiple feeds of entirely different programming on the same channel. This ability to provide either a single HDTV feed or multiple lower-resolution feeds is often referred to as distributing one's " Bit Budget " or multicasting. This can sometimes be arranged automatically, using a Statistical Multiplexer (or "stat-mux"). With some implementations, image resolution may be less directly limited by bandwidth; for in DVB-T , broadcasters can choose from several different modulation schemes, giving them the option to reduce the transmission Bitrate and make reception easier for more distant or mobile viewers. Reception There are a number of different ways to receive digital television. One of the oldest means of receiving DTV (and TV in general) is using an Antenna (known as an ''aerial'' in some countries). This way is known as Digital Terrestrial Television (DTT). With DTT, viewers are limited to whatever channels the antenna picks up. Signal quality will also vary. Other ways have been devised to receive digital television. Among the most familiar to people are Digital Cable and Digital Satellite . In some countries where transmissions of TV signals are normally achieved by Microwaves , digital MMDS is used. Other standards, such as DMB and DVB-H , have been devised to allow handheld devices such as Mobile Phones to receive TV signals. Another way is IPTV , that is receiving TV via Internet Protocol with guaranteed quality of service ( QoS ). Finally, an alternative way is to receive TV signals via the open Internet infra-structure, usually referred to as Internet TV. Today, regardless of how viewers receive DTV, most will pick up digital television via a set-top box, which Decodes the digital signals into signals that analog televisions can understand—thus using the television purely as a ''monitor''. However, a growing number of TV sets with integrated receivers are available—these are known as ''iDTVs''. Some signals carry Encryption and specify use conditions (such as "may not be recorded" or "may not be viewed on displays larger than 1m in diagonal measure") backed up with the force of law under the WIPO Copyright Treaty and national Legislation implementing it, such as the U.S. Digital Millennium Copyright Act . Access to encrypted channels can be controlled by a removable Smart Card , for example via the Common Interface ( DVB-CI ) standard for Europe and via Point Of Deployment (POD) for IS or named differently CableCard . Protection parameters for terrestrial DTV broadcasting |
|
|