| Center Pivot Irrigation |
Article Index for Center |
Limousines in Center |
Website Links For Center |
Information AboutCenter Pivot Irrigation |
| CATEGORIES ABOUT CENTER PIVOT IRRIGATION | |
| irrigation | |
|
Centre pivot irrigation (sometimes called '''central pivot irrigation'''), also called '''circle irrigation''', is a method of Crop Irrigation in which equipment rotates around a Pivot . A Circular area centred on the pivot is irrigated, often creating a circular pattern in crops when viewed from above. Central pivot irrigation is a form of overhead ( Sprinkler ) irrigation consisting of several segments of pipe (usually Galvanized Steel or Aluminium ) joined together and supported by Truss es, mounted on wheeled towers with sprinklers positioned along its length. The system moves in a circular pattern and is fed with water from the pivot point at the center of the circle. The outside set of wheels sets the master pace for the rotation (typically once every three days). The inner sets of wheels are mounted at hubs between two segments and use angle sensors to detect when the bend at the joint exceeds a certain threshold, and thus, the wheels should be rotated to keep the segments aligned. Most center pivot systems now have drops hanging from a u-shaped pipe called a ''gooseneck'' attached at the top of the pipe with sprinkler heads that are positioned a few feet (at most) above the crop, thus limiting Evaporative losses. Drops can also be used with drag hoses or bubblers that deposit the water directly on the ground between crops. The crops are sometimes planted in a circle to conform to the center pivot. This type of system is known as LEPA ( Low Energy Precision Application ). Originally, most center pivots were water-powered. These were replaced by Hydraulic systems (''T-L'') and electric motor-driven systems (''Lindsay'', ''Reinke'', ''Valley''). Most systems today are driven by an Electric Motor mounted at each tower. The above mentioned equipment can also be configured to move in a straight line, where the water is pulled from a central ditch. In this scenario, the system is called a ''linear move'' irrigation system. Terrain needs to be reasonably flat. It is a much used system in parts of the United States , New Zealand and on a smaller scale in desert areas such as the Sahara and the Middle East. SEE ALSO |
|
|