Buzzer Articles about
Buzzer
 

Information About

Buzzer




A buzzer or '''beeper''' is a signaling device, usually electronic, typically used in Automobile s, household appliances such as a Microwave Oven , or Game Show s.

It most commonly consists of a number of Switch es or Sensor s connected to a control unit that determines if and which button was pushed or a preset time has lapsed, and usually illuminates a light on the appropriate button or control panel, and sounds a warning in the form of a continuous or intermittent buzzing or beeping Sound .
Initially this device was based on an electromechanical system which was identical to an Electric Bell without the metal gong (which makes the ringing noise). Often these units were anchored to a wall or ceiling and used the ceiling or wall as a sounding board. Another implementation with some AC-connected devices was to implement a circuit to make the AC current into a noise loud enough to drive a loudspeaker and hook this circuit up to a cheap 8-ohm speaker. Nowadays, it is more popular to use a ceramic-based Piezoelectric sounder like a Sonalert which makes a high-pitched tone. Usually these were hooked up to "driver" circuits which varied the pitch of the sound or pulsed the sound on and off.

In game shows it is also known as a "lockout system," because when one person signals ("buzzes in"), all others are locked out from signalling. Several game shows have large buzzer buttons which are identified as "plungers".

The word "buzzer" comes from the rasping noise that buzzers made when they were electromechanical devices, operated from stepped-down AC line voltage at 50 or 60 cycles. Other sounds commonly used to indicate that a button has been pressed are a ring or a beep.

Some systems, such as the one used on ''. These buzzers do not make a sound or turn on a light; instead, they stop a nearby digital clock, briefly activate two smoke machines on each side of the stage exit, and open the exit. However, at the end of the Heartbreaker in Viking, the buzzer is replaced with a sword that, when removed, causes two contacts to touch, closing the circuit and causing the latter two actions above to occur.

Nowadays some people use the word "buzzer" as to describe a person who's able to create a big buzz around a brand, an event or a company.