Barcode Reader Article Index for
Barcode 		Shopping
Barcode 		Website Links For
Barcode 		 

Information About

Barcode Reader
  CATEGORIES ABOUT BARCODE READER
   
automatic identification and data capture
   
embedded systems
   
barcodes
   
APPAREL
BABY
BEAUTY
BOOKS
CAR TOYS
CELL PHONES
DVD'S
ELECTRONICS
GOURMET FOOD
GROCERIES
HEALTH & PERSONAL
HOME & GARDEN
JEWELRY
MUSIC
MUSIC INSTRUMENTS
OFFICE PRODUCTS
SOFTWARE
SPORTING GOODS
TOOLS & HARDWARE
TOYS
VIDEO GAMES
SHOPPING HOME
MORE SHOPPING...



A barcode reader (or '''barcode scanner''') is an electronic device for reading Barcode s printed on various surfaces. Like a Flatbed Scanner , it generally consists of a light source, a lens and a photo conductor translating optical impulses into electrical ones. Additionally, nearly all barcode readers currently produced contain ''decoder'' circuitry analyzing the barcode's image data provided by the photo conductor and sending the barcode's content to the scanner's output port.


TYPES OF BARCODE READERS

Many different types of barcode scanners are available. Their can be distinguished as follows:


By technology

  • Pen type readers

    • Pen type readers consist of a light source and a Photodiode that are placed next to each other in the tip of a pen or wand. To read a bar code, tip of the pen moves across all the bars in a steady even motion. The photodiode measures the intensity of the light reflected back from the light source and generates a waveform that is used to measure the widths of the bars and spaces in the bar code. Dark bars in the bar code absorb light and white spaces reflect light so that the voltage waveform generated by the photo diode is a representation of the bar and space pattern in the bar code. This waveform is decoded by the scanner in a manner similar to the way Morse Code dots and dashes are decoded.

  • Laser scanners

    • Laser Scanner s work the same way as pen type readers except that they use a Laser beam as the light source and typically employ either a reciprocating mirror or a rotating prism to scan the laser beam back and forth across the bar code. Just the same as with the pen type reader, a photodiode is used to measure the intensity of the light reflected back from the bar code. In both pen readers and laser scanners, the light emitted by the reader is tuned to a specific frequency and the photodiode is designed to detect only this same frequency light.

  • CCD Readers

    • CCD readers (also referred to as LED scanner) use an array of hundreds of tiny light sensors lined up in a row in the head of the reader. Each sensor can be thought of as a single photodiode that measures the intensity of the light immediately in front of it. Each individual light sensor in the CCD reader is extremely small and because there are hundreds of sensors lined up in a row, a voltage pattern identical to the pattern in a bar code is generated in the reader by sequentially measuring the voltages across each sensor in the row. The important difference between a CCD reader and a pen or laser scanner is that the CCD reader is measuring emitted ambient light from the bar code whereas pen or laser scanners are measuring reflected light of a specific frequency originating from the scanner itself.

  • Camera-Based Readers

    • 2D Imaging Scanners are the fourth and newest type of bar code reader currently available. They use a small video camera to capture an image of a bar code. The reader then uses sophisticated digital image processing techniques to decode the bar code. Video cameras use the same CCD technology as in a CCD bar code reader except that instead of having a single row of sensors, a video camera has hundreds of rows of sensors arranged in a two dimensional array so that they can generate an image.



By housing

  • Handheld scanner : with a handle and typically a trigger button for switching on the light source.

  • Pen scanner (or '''wand scanner''') : a pen-shaped scanner that is swiped.

  • Stationary scanner : wall- or table-mounted scanners that the barcode is passed under or beside. These are commonly found at the checkout counters of Supermarket s and other Retailer s.

  • Fixed position scanner : an industrial barcode reader used to identify products during manufacture or logistics. Most often used on conveyer tracks to identify cartons or pallets which need to be routed to another process or shipping location.

  • PDA scanner : a PDA with a built-in barcode reader or attached barcode scanner e.g. Grabba.



TYPES OF CONNECTORS


Most barcode readers use a with its second, and to the barcode reader with its third end. The barcode characters are then received by the host computer as if they came from its keyboard decoded and converted to keyboard input within the scanner housing. This makes it extremely easy to interface the bar code reader to any application that is written to accept Keyboard input. However, this kind of direct input has some drawbacks. You cannot operate with that data, so in case you need to parse a code into several parts you will not be able, and the input will appear wherever the cursor was, so you must be sure it is set in the proper place.

Many readers can also be equipped with an RS-232 output port so that the decoded characters arrive at the computer via one of its RS-232 connectors. You would then need a program called a "Software Wedge" to take the data from the bar code reader and feed it to the application where you want the data to go. Using this interface you gain much more control over how and where your data ends up when you read a bar code.

USB is supported by many newer scanners. In many cases a choice of USB interface types (HID, CDC) are provided.

There are a few other less common interfaces. The proprietary IBM interfaces (port 5B, port 9B and port 17) that use an SDL type connector and are based on an RS485 protocol. OCIA is sometimes still variety of connector types. Undecoded interface is an amplified output of the raw wave received back from the barcode and requires a decoder found, mostly used on older stand alone cash registers with a wide to be built into the terminal that the scanner connects to which is more common on industrial terminals. Wand emulation is another output type that takes the raw wave and decodes it, normalizing the output so it can be easily decoded by the host device. Wand emulation can also convert symbologies that may not be recognized by the host device into another symbology (typically Code 39 ) that can be easily decoded.


RESOLUTION

Pen type readers and laser scanners have "resolution" as one of their main characteristics.
The scanner resolution is measured by the size of the dot of light emitted by the reader. If this dot of light is wider than any bar or space in the bar code, then it will overlap two elements (two spaces or two bars) and it may produce wrong output. On the other hand, if a too small dot of light is used, then it can misinterpret any spot on the bar code making the final output wrong.
The most commonly used dimension is 13 Mils . As it is a very high resolution, it is extremely important to have bar codes created with a high resolution graphic application.


BARCODE APPLICATIONS FOR CONSUMERS

While barcode readers are typically used in retail, warehouses, and industry, inexpensive barcode readers open up a number of applications for individual consumers. CueCat was an initial proprietary foray into this area. However the CueCat barcode reader output encrypted data. The code was hacked making it possible to use for other uses though it was still inconvenient to install. CueCat had problems with privacy where the readers transmitted a serial number to their website. The product was mostly restricted to their software. The sites CueCat linked to were determined by payments to CueCat rather than consumer preference. These issues limited the usefulness of the CueCat .

While cell phone cameras are not optimal for many traditional barcodes, there are 2D barcodes Optimized For Cell Phones .
These open up a number of potential applications for consumers:
  • Movies: DVD/VHS movie catalogs

  • Music: CD catalogs, play MP3 when scanned

  • Book catalogs

  • Groceries, Nutrition information, making shopping lists when you use the last of an item, etc.

  • Personal Property inventory (for insurance and other purposes)

  • Cataloging property stored in boxes in the garage, basement, attic, self-storage units, etc for easy retrieval, selling surplus on ebay, etc

  • Calling cards: 2D barcodes can store contact information for importing.

  • Brick and mortar shopping: Portable scanners can be used to record items of interest for looking up online when you get home.

  • Coupon management: weeding expired coupons.

  • Personal finance. Receipts can be tagged with a barcode label and the barcode scanned into personal finance software when entering. Later, scanned receipt images can then be automatically associated with the appropriate entries. Later, the bar codes can be used to rapidly weed out paper copies not required to be retained for tax or asset inventory purposes.

  • If retailers put barcodes on receipts that allowed downloading an electronic copy or encoded the entire receipt in a 2D barcode, consumers could easily import data into personal finance, property inventory, and grocery management software. Receipts scanned on a scanner could be automatically identified and associated with the appropriate entries in finance and property inventory software.



SEE ALSO




BARCODE READER MANUFACTURERS





EXTERNAL LINKS