| Stackguard |
Website Links For Protection |
Information AboutStackguard |
| CATEGORIES ABOUT STACK-SMASHING PROTECTION | |
| programming bugs | |
| security exploits | |
|
HOW IT WORKS See Also: Stack buffer overflow Typically, stack-smashing protection modifies the organization of data in the Stack Frame of a Function Call to include a "canary" value which, when destroyed, shows that a buffer preceding it in memory has been overflowed. This gives the benefit of preventing an entire class of attacks. According to some software, the performance impact of these techniques is negligible. CANARIES Canaries or '''canary words''' are known values that are placed between a buffer and control data on the stack to monitor buffer overflows. When the buffer overflows, the first data to be corrupted will be the canary, and a failed verification of the canary data is therefore an alert of an overflow, which can then be handled, for example, by invalidating the corrupted data. The terminology is a reference to the historic practice of using Canaries in coal mines, since they would be affected by toxic gases earlier than the miners, thus providing a biological warning system. There are three types of canaries in use: Terminator, '''Random''', and '''Random XOR'''. Current versions of StackGuard support all three, while ProPolice supports Terminator and '''Random''' canaries. Terminator canaries Terminator Canaries use the observation that most buffer overflows and stack smash attacks are based on certain string operations which end at terminators. The reaction to this observation is that the canaries are built of NULL terminators, CR, LF, and -1. The undesirable result is that the canary is known. Even with the stack-smashing protection, an attacker could potentially overwrite the canary and control information, then go back and write a shorter overflow to fix the canary. This is only effective in rare cases where double-overflows are possible. Random canaries Random canaries are randomly generated, usually from an Entropy Gathering Daemon , so an attacker doesn't know what it is. Usually, it is not logically possible or plausible to read the canary for exploiting; the canary is a secure value known only by those who need to know it, the stack-smashing protection code in this case. Normally, a random canary is generated at program initialization, and stored in a global variable. This variable is usually padded by unmapped pages, so that attempting to read it using any kinds of tricks that exploit bugs to read off RAM cause a segmentation fault, terminating the program. It may still be possible to read the canary, if the attacker knows where it is, or can get the program to read from the stack. Random XOR canaries Random XOR Canaries are Random Canaries that are XOR scrambled using all or part of the control data. In this way, once the canary or the control data is clobbered, the canary value is wrong. Random XOR Canaries have the same vulnerabilities as Random Canaries, except that the 'read from stack' method of getting the canary is a bit more complicated. The attacker must get the canary, the algorithm, and the control data to generate the original canary for re-encoding into the canary he needs to use to spoof the protection. In addition, Random XOR Canaries can protect against a certain type of attack involving overflowing a buffer in a structure into a pointer to change the pointer to point at a piece of control data. Because of the XOR encoding, the canary will be wrong if the control data or return value is changed. Because of the pointer, the control data or return value can be changed without overflowing over the canary. Although these canaries protect the control data from being altered by clobbered pointers, they do not protect any other data or the pointers themselves. Function pointers especially are a problem here, as they can be overflowed into and will execute shellcode when called. ATTACKS STACK-SMASHING PROTECTION CANNOT PROTECT AGAINST Stack-smashing protection is unable to protect against certain forms of attack. For example, it cannot protect against buffer overflows in heap; that would be left to heap-smash protection. StackGuard and ProPolice cannot protect against overflows in automatically allocated structures which overflow into function pointers. ProPolice at least will rearrange the allocation order to get such structures allocated before function pointers. There is no sane way to alter the structure of a structure; structures are expected to be the same between modules, especially with shared libraries. Any data in a structure after a buffer is impossible to protect with canaries; thus, programmers must be very careful about how they organize their variables and use their structures. Structures with buffers should be malloc()ed or new {Link without Title} ed pointers. IMPLEMENTATIONS StackGuard StackGuard was the first canary stack protector, released for GCC in 1997, and published at USENIX Security 1998 . StackGuard is an extension to GCC that provides stack-smashing protection. It was invented by Crispin Cowan , first implemented as a zero canary in the i386 backend for GCC 2.7.2.2 by Aaron Grier, and verified by Peat Bakke. Perry Wagle continued maintenance of StackGuard for the Immunix project, and implemented the Terminator, Random, and Random XOR canaries. StackGuard was made available as a standard part of the Immunix Linux distribution from 1998 to 2003, providing both Red Hat-compatible binary RPMs and patched GCC sources from GCC 2.7.2.3 through 2.96. 3.x offers no official stack-smashing protection, and the SSP concept below has been adapted for GCC 4.1 instead. GCC Stack-Smashing Protector (ProPolice) The "Stack-Smashing Protector" or SSP, also known as ProPolice, is an enhancement of the StackGuard concept written and maintained by Hiroaki Etoh of IBM . Its name derives from the word Propolis . ProPolice differs from StackGuard in 3 ways:
It was implemented as a patch to GCC 3.x; a less intrusive reimplementation is included in the GCC 4.1 release. Currently, the 3.x patch is standard in OpenBSD , Ubuntu (since 6.10), Adamantix (formerly known as Trusted Debian), DragonFly BSD , Hardened Linuxfromscratch and the IPCop Linux distribution. It is also available in Debian and Gentoo , but is disabled by default. Under Gentoo, stack-smashing protection can be attained by adding the -fstack-protector flag for string protection, or '''-fstack-protector-all''' for protection of all types. Under OpenBSD, ProPolice is enabled by default, and the '''-fno-stack-protector''' flag disables it. With regards to Gentoo, certain packages that need to detect the presence of stack smash protection will fail if you do it that way. pycrypto has been known to fail with -fstack-protector-all too. Instead, it is recommended to use the Hardened Profile . More information can be found in the Gentoo Hardened Page . StackGhost (hardware-based) Invented by (a common way for an Exploit to hijack execution paths) transparently, automatically protecting all applications without requiring binary or source modifications. The performance impact is negligible, less than one percent. The resulting Gdb issues were resolved by Mark Kettenis two years later, allowing enabling of the feature. Following this event, the StackGhost code was integrated (and optimized) into OpenBSD /SPARC. AN EXAMPLE OF CANARIES Normal buffer allocation for X86 architectures and other similar architectures is shown in the Buffer Overflow entry. Here, we will show the modified process as it pertains to StackGuard. When a function is called, a stack frame is created. A stack frame is built from the end of memory to the beginning; and each stack frame is placed on the top of the stack, closest to the beginning of memory. Thus, running off the end of a piece of data in a stack frame alters data previously entered into the stack frame; and running off the end of a stack frame places data into the previous stack frame. A typical stack frame may look as below, having a Return Address (RETA) placed first, followed by other control information (CTLI). (CTLI)(RETA) In C, a function may contain many different per-call data structures. Each piece of data created on call is placed in the stack frame in order, and is thus ordered from the end to the beginning of memory. Below is a hypothetical function and its stack frame. int foo() {
char d {Link without Title} ;
strcpy(d,get_d());
} (d..)(c.........)(b...)(a...)(CTLI)(RETA) In this hypothetical situation, if more than ten bytes are written to the array ''c'', or more than 13 to the character array ''d'', the excess will overflow into integer pointer ''b'', then into integer ''a'', then into the control information, and finally the return address. By overwriting ''b'', the pointer is made to reference any position in memory, causing a read from an arbitrary address. By overwriting ''RETA'', the function can be made to execute other code (when it attempts to return), either existing functions (ret2libc) or code written into the stack during the overflow. In a nutshell, poor handling of ''c'' and ''d'', such as the unbounded Strcpy () calls above, may allow an attacker to control a program by influencing the values assigned to ''c'' and ''d'' directly. The goal of stack-smashing protection is to detect this issue in the least intrusive way possible. This is done by removing what can be out of harms way and placing a sort of tripwire, or canary, after the buffer. Stack-smashing protection is implemented as a change to the compiler. As such, it is possible for the protection to alter the structure of the data on the stack frame. This is exactly the case in systems such as ''ProPolice''. The above function's automatic variables are rearranged more safely: arrays ''c'' and ''d'' are allocated first in the stack frame, which places integer ''a'' and integer pointer ''b'' before them in memory. So the stack frame becomes (b...)(a...)(d..)(c.........)(CTLI)(RETA) As it is impossible to move ''CTLI'' or ''RETA'' without breaking the produced code, another tactic is employed. An extra piece of information, called a "canary" (CNRY), is placed after the buffers in the stack frame. When the buffers overflow, the canary value is changed. Thus, to effectively attack the program, an attacker must leave definite indication of his attack. The stack frame is (b...)(a...)(d..)(c.........)(CNRY)(CTLI)(RETA) At the end of every function there is an instruction which continues execution from the memory address indicated by ''RETA''. Before this instruction is executed, a check of ''CNRY'' ensures it has not been altered. If the value of ''CNRY'' fails the test, program execution is ended immediately. In essence, both serious attacks and harmless programming bugs result in a program abort. The canary technique adds a few instructions of overhead for every function call with an automatic array, immediately before all dynamic buffer allocation and after dynamic buffer deallocation. The overhead generated in this technique is not significant. It does work, though, unless the canary remains unchanged. If the attacker knows that it's there, he may simply copy over it with itself. This is usually difficult to arrange intentionally, and highly improbable in unintentional situations. The position of the canary is implementation specific, but it is always between the buffers and the protected data. Varied positions and lengths have varied benefits. SEE ALSO EXTERNAL LINKS
|
|
|