Information AboutRack Railway |
| CATEGORIES ABOUT RACK RAILWAY | |
| vertical transportation devices | |
| rail technologies | |
| rail transport related lists | |
|
.]] A cog railway, '''rack-and-pinion railway''' or '''rack railway''' is a Railway with a toothed Rack Rail , usually between the running Rails . The Train s are fitted with one or more Cog Wheels or Pinion s that mesh with this Rack Rail . This allows the trains to operate on steep Gradients . Most rack railways are Mountain Railway s, although a few are Transit Railways or Tram ways built to overcome a steep Gradient in an Urban environment. The first cog railway was the Middleton Railway between Middleton and Leeds in West Yorkshire , England , UK , where the first commercial Steam Locomotive , '' The Salamanca '', ran in 1812. This used a rack and pinion system designed and patented in 1811 by John Blenkinsop . The first mountain cog railway was the Mount Washington Cog Railway in the US state of New Hampshire , which carried its first fare-paying passengers in 1868 and reached the summit of Mount Washington in 1869. The first rack railway in Europe was the Vitznau-Rigi-Bahn on Mount Rigi in Switzerland , which opened in 1871. Both lines are still running. RACK SYSTEMS A number of different rack systems have been developed. Today, the majority of rack railways use the Abt system. Riggenbach The Riggenbach rack system, invented by Niklaus Riggenbach , is the oldest form of rack railway and uses a Ladder Rack , formed of Steel Plates or Channels connected by Round or Square Rods at regular intervals. The Riggenbach system was the first system devised, and suffers from the problem that its fixed Ladder Rack is much more complex and expensive to build than the other systems. It was invented in 1863 and first used on the Vitznau-Rigi-Bahn in 1871. Marsh The Marsh rack system was invented by the American inventor Sylvester Marsh at about the same time that Niklaus Riggenbach invented his Riggenbach system. It is used on the Mount Washington Cog Railway . The two systems resemble each other, and may be referred to by either name. Strub The Strub Rack System , invented by Emil Strub , is similar to the Abt Rack System but uses just one wide rack plate welded on top of a flat bottom T Rail . It is the simplest rack system to maintain and has become increasingly popular. Abt The Abt system was devised by Roman Abt , a Swiss locomotive engineer working for a Riggenbach-equipped line. The Abt rack has steel plates mounted vertically parallel to the rails, with rack teeth in them machined to a precise profile. These engage with the locomotive's pinion teeth much more smoothly than the Riggenbach system. Two or three parallel sets of Abt rack plates are used, with a corresponding number of driving pinions on the locomotive, to ensure that at least one pinion tooth is always engaged securely. The pinion wheels can be mounted on the same axle as the rail wheels (as in the picture at right), or driven separately. The steam locomotives on the Mount Lyell Mining And Railway Company had separate pistons driving the pinion wheel. Locher The Locher Rack System , invented by Eduard Locher , has Gear teeth cut in the sides rather than the top of the rail, engaged by two cog wheels on the locomotive. This system allows use on steeper grades than the other systems, whose teeth could jump out of the rack. It is used on the Pilatus Railway . Von Roll The Von Roll Rack System , by the Von Roll Company , is similar to the Abt system, except that the teeth in the single blade are cut to suit the gear geometry of either the Riggenbach system cog or the Strub system cog wheels. Because of its simplicity, the Von Roll rack can replace Riggenbach or Strub rack without the need to replace the Cogs . In some railways the (usually) older Riggenbach segments are freely mixed with the more recently mounted Strub sections. Rack-and-adhesion systems / Pure rack systems Rack-and-adhesion systems use the cog drive only on the steepest sections and elsewhere operate as a regular railway. Others, the steeper ones, are rack-only. On the latter type, the locomotives' wheels are generally free-wheeling and despite appearances do not contribute to driving the train. In this case the racks continue also in the horizontal parts, if any. Fell The Fell Mountain Railway System is not a rack railway. This system uses a raised centre rail between the two running rails on steep lines. Trains are propelled by wheels or braked by shoes pressed horizontally onto the centre rail, as well as by means of the the normal running wheels. COG LOCOMOTIVES Originally almost all Cog railways were powered by Steam Locomotive s. The steam locomotive needs to be extensively modified to work effectively in this environment. Unlike a Diesel Locomotive or Electric Locomotive , the steam locomotive only works when its powerplant (the boiler, in this case) is fairly level. The locomotive boiler requires water to cover the Boiler Tube s and Firebox sheets at all times, particularly the Crown Sheet , the metal top of the firebox. If this is not covered with water, the heat of the fire will soften it enough to give way under the boiler pressure, leading to a catastrophic failure. On rack systems with extreme gradients, the boiler, cab and general superstructure of the locomotive are tilted forward relative to the wheels so that they are more or less horizontal when on the steeply graded track. These locomotives often cannot function on level track, and so the entire line, including maintenance shops, must be laid on a gradient. This is one of the reasons why Rack railways were among the first to be electrified and most of today's rack railways are electrically powered. On a rack-only railroad locomotives always push their Passenger Car s for safety reasons since the locomotive is fitted with powerful brakes, often including hooks or clamps that grip the rack rail solidly. Some locomotives are fitted with automatic brakes that apply if the speed gets too high, preventing runaways. Often there is no coupler between locomotive and train since gravity will always push the passenger car down against the locomotive. Electrically powered vehicles often have electromagnetic track brakes as well. The maximum speed of trains operating on a cog railway is generally very low, about 25 km/h . LIST OF COG AND RACK RAILWAYS See also List Of Mountain Railways Argentina
Australia
Austria
Brazil
Chile
Czech republic France Germany
Greece Hungary
Indonesia
India Italy Japan
Lebanon Panama
Slovakia Spain Switzerland
See also United Kingdom United States
RACK RAILWAYS IN FICTION The Culdee Fell Railway is a Fictional cog railway on the Island Of Sodor in The Railway Series by Rev. W. Awdry . Its operation, Locomotives and history are at least in part based on the Snowdon Mountain Railway . It is featured in the book ''Mountain Engines'' . SEE ALSO
EXTERNAL LINKS |
|
|