| M40 Rifle |
Article Index for M40 |
Website Links For Rifle |
Information AboutM40 Rifle |
| CATEGORIES ABOUT M40 RIFLE | |
| 7.62 mm firearms | |
| bolt-action rifles | |
| sniper rifles | |
| united states marine corps equipment | |
The M40 is a Sniper Rifle used by the United States Marine Corps . It has had three variants — the M40, the '''M40A1''' and the '''M40A3'''. The M40 was introduced in 1966. The changeover to the A1 model was completed in the 1970s, and the A3 in the 2000s. The A3 model costs $3,200. Each firearm begins life as a Remington 700, and is then extensively modified by hand by USMC armorers at Marine Corps Base Quantico , using components from a number of suppliers. New M40A3s are being built, and A1s are upgraded to A3s as they rotate into the armory for service and repair. The rifles have had many sub-variations in Telescopic Sight s, and smaller user modifications. The original M40 was a military type-classified version of the Remington 700 ; it was factory-made, and had a one-piece wooden Stock . The M40A1 and A3 switched to fiberglass, with new scopes added as well. The scope itself costs $1000. HISTORY During the Vietnam War , the Marine Corps decided they needed a standard sniper rifle. After testing several possibilities, they ordered 700 Remington Model 40x rifles (target/varmint version of the Model 700 Bolt-action rifle), and gave them the M40 designation. Most had a Redfield 3–9 power Accurange variable scope mounted. With time, certain weaknesses, primarily warping of the all-wood stock, became apparent. Sometime in the early 1970s, the USMC armorers at MCB Quantico began rebuilding the original M40s into M40A1s. The process involved, among other improvements, replacing the original wood stocks with McMillan A1[http://www.mcmfamily.com/mfsinc_n/ fiberglass stocks, as well as replacing the original Redfield scopes with Unertl [http://www.unertloptics.com/] scopes. The U.S. Army also uses the Remington 700 /40x action as the basis for its M24 Sniper Weapon System . The primary difference between the Army and the USMC rifles is that while the USMC M40/A1/A3 utilizes the short action version of the Remington 700/40x (designed for shorter cartridges, such as .308 Winchester , 7 mm/08 Remington, .243 Winchester), the Army M24 uses the long action version of the same rifle (designed for full-length cartridges, such as the .30-06 Springfield , and Magnum cartridges, such as the 7 mm Remington Magnum, .300 Winchester Magnum and .338 Winchester Magnum ). The U.S. Army reasoning behind this decision was to allow them to reconfigure the rifle in the larger, longer-range calibers if necessary. M40A3 Development of the M40A3 began in 1996, and the final product was revealed in 2001. Since then, numerous minor changes have occurred to the platform. It is highly possible that more changes will occur to the platform as it gains operational use in Iraq and Afghanistan. Listed here is the latest configuration known to be used in an M40A3. Action — The M40 has always been based on the proven Remington 700 Short Action (as opposed to the Long Action in the M24 ), and this is no different in the M40A3. These actions are all chambered in 7.62 Mm NATO and are house tuned by Marine armorers; the trigger guard assembly is manufactured by the DD Ross Company, though several M40A3s use Badger Ordnance trigger guards. In 2007, the Marine Corps began replacing the DD Ross trigger guard assemblies with the M5 detachable magazine trigger guard manufactured by Badger Ordnance. Barrel — The barrel is a Schneider 610 /24-inch (25-inch), 5-groove, 1:12" match-grade heavy barrel. Stock — All service M40A3s are based upon the A4 Tactical Riflestock, a high-quality benchrest-style fiberglass riflestock made by McMillan Fiberglass Stocks and cast molded in an OD Green color. The action is glass bedded into the stock with aluminum pillars, while the barrel is allowed to "float" (it is attached only to the action), ensuring maximum accuracy. The stock has adjustable length-of-pull (through a buttstock spacer system) and a Marine manufactured adjustable saddle-type cheekpiece. The stock also has 5 mount flush cups, 2 on each side front and back and 1 on the rear underside. One bipod stud is located on the underside of the forearm. Sling — The Model 1907 sling that has been historically used on M40A3s has been replaced with the Quick Cuff Model Two sling manufactured by Tactical Intervention Specialists . Bipod — The M40A3s use a 6-9" Harris notched swivel type bipod with a KMW podlock. The QD bipod attaching screw is replaced with a screw made by Jon Tank of Tanks Rifle Shop. Dayscope — A Schmidt & Bender 3-12x50 PMII ). The scope base is a Badger Ordnance 30 minute-of-angle lugged base. IMAGES COMPARISON SEE ALSO Lists:
Related designation: |
|
|