| Train Reporting Number |
Article Index for Train |
Website Links For Train |
Information AboutTrain Reporting Number |
| CATEGORIES ABOUT TRAIN REPORTING NUMBER | |
| rail transport in great britain | |
|
A headcode or '''train reporting number''' is used by Railway staff in Great Britain to identify a particular Train service. It consists of:
COMPONENTS Its main purpose is to assist the signaller in routing the train correctly, and it is especially useful if services are disrupted. The number is shown in the working Timetable issued to staff and on systems such as TOPS ; it is not normally provided to passengers. Some Train Operating Companies print the headcode on a ticket when cancelling it, for example 1V45 on a cross-country service to Plymouth , or 1F22 on a West Coast London Euston to Liverpool Lime Street train. Train Classes For operational reasons, certain trains have priority in running. To help operating staff, they are grouped into classes {Link without Title} : # Express passenger train, nominated postal or parcels train, breakdown or overhead line equipment train going to clear the line or returning from there(Code 1Z99), traction unit going to assist a failed train (1Z99), or a Snowplough going to clear the line (1Z99) # Ordinary passenger train, breakdown or overhead line equipment train not going to clear the line (2Z99), or an Officers’ special train (2Z01) # Freight train which can run at more than 75 mph, parcels train, or empty coaching stock train if specially authorised # Freight train limited to 75mph # Empty coaching stock train # Freight train limited to 60mph # Freight train limited to 45mph # Freight train limited to, or timed to run at, 35mph or less # Class 373 train. Class 0 is used for light Locomotives . Newspaper and postal trains are consigned to history. The classes' definitions have changed several times since being introduced: Class 3 was formerly used for parcels trains, and Class 9 for freight trains without fitted brakes. Destination Letters For long distance trains, the country is split up into areas based upon the old British Rail regions. Each one is assigned a letter as follows:
A train going from one region to another is given the letter of the destination region in its headcode. For trains internal to a region, the remaining letters can be used to indicate either:
Some areas within the Midland region are:
Other regions can use these letters for different areas, but the inter-regional codes have the same meaning throughout the country. Individual Identifier Because there are many trains of the same type heading for similar destinations (for example, most expresses to Scotland have headcodes beginning with 1S) the last two digits are used to separate individual services, or to indicate the route (generally for suburban services). There is sometimes duplication because there are only two digits, so it is the rule for individually-numbered trains that there must be six hours between services with the same headcode. EXAMPLES
SPECIAL NUMBERING It is common practice for empty coaching stock (class 5) trains on the way to form a service to run with the service train's number, but prefixed with a 5. For example, train 5M37 would usually be on its way to form 1M37 or 2M37. Similarly, locomotives on the way to pick up a train or running round to change the direction of travel are given the train number but with a 0 prefix. Eurostar trains usually run in the 9Oxx or 9Ixx range; the former for services to or from France, the latter for Belgium services. Some services with special requirements receive other letters for their destination:
A light locomotive on a driver training run would likely be numbered 0Zxx, while a railtour is likely to be an express passenger train, so would be numbered 1Zxx. USE OF HEADCODES The four-character system was originally devised in the early 1960s. Locomotives built in the 1960s and 1970s were equipped with indicator boxes that displayed the headcode on roller blinds for operating staff. However, they were found to be expensive to maintain, so from 1976 they were taken out of use (this is why photographs from this period almost always show the blinds set to ''0000'', blank or two white dots). British rail undertook modifications to locomotive noses to plate over the indicators and replaced with marker lights. Some locomotives never received the modification under British Rail and continue to this day to operate with usually blank headcode panels as the current train operating companies do not have the removal of the unused panels as a priority. Not all locomotives carried ''0000'' headcodes. The Western locomotives had four digit numbering and it became a tradition to show the locomotive number on the headcodes. SEE ALSO Ever wondered what the headcode panel means? - has a fairly detailed explanation and a list of Scottish region codes. 2D53: 4-character train reporting numbers - an excellent site with example photos. |
|
|