Snowboarding Article Index for
Snowboarding
Articles about
Snowboarding
Website Links For
Snowboarding
 

Information About

Snowboarding




]]

'' Snowboarding ''
is a Boardsport on Snow similar to Skiing , but inspired by Surfing and Skateboarding . Snowboarding is an increasingly common winter sport throughout the world.

A snowboarder's equipment consists of a Snowboard , snowboarding boots, bindings to attach their boots to the board, as well as snowboarding-specific winter clothing. Snowboarding became a Winter Olympic Games sport in 1998 . Other events that focus on snowboarding are the annual European and U.S. Open Snowboarding Championships and the Winter X-Games . These events are hosted by various winter resorts in Europe , United States , and Canada .


HISTORY


The snowboard evolved from early pioneering work by people such as Sherman Poppen (who, in 1965 , invented the " Snurfer " in his North Muskegon, Michigan home), Chuck Barfoot, Dimitri Mitrovitch, Tom Sims, and Jake Burton . Jake Burton is the founder of Burton Snowboards , one of the largest, and most established snowboard companies in the world. In the early 1980s , snowboard companies such as Sims, Winterstick, and Avalanche began emerging across the country. Also in the early 1980s, films by Warren Miller began to feature clips of snowboarders, boosting the popularity of the sport among the skiing community. It was not until the mid-1980s that snowboarding exploded into the mainstream, when the first snowboard magazine, ''Absolutely Radical'', hit the racks; it was soon renamed ''International Snowboard Magazine''. For more on the history of snowboarding, see this Snowboard History Timeline.


DISCIPLINES


mastering mixed style.]]
There are four primary sub-disciplines or sub-styles within snowboarding with each favoring a slightly different Snowboard Design .


Freeride

Freeriding is using the natural terrain of the mountain for recreation, without focusing on technical tricks or racing. Most snowboarders aspire to be freeriders and will explore the mountain through trees, in powder bowls or anywhere else they feel comfortable riding. Freeriding is also known as All-mountain Snowboarding . A variant of freeriding focusing on extremely difficult lines is known as Extreme Snowboarding or big mountain snowboarding.

Freeride snowboarding, where the focus is on riding cleanly and enjoying the freedom to go and explore anywhere is influenced significantly by Surfing . Many freeride purists attach an almost Spiritual connotation to carving down the mountain.


Freestyle


Freestyle snowboarding is the practice of doing different kinds of tricks on a snowboard. Tricks can either occur on the ground (e.g. jibbing, bonking, grinding, pressing, buttering etc.) or in the air (e.g. spins, flips, grabs). Freestyle snowboarders typically use shorter boards and softer boots than other snowboarders, as the shorter board length reduces the weight and Moment Of Inertia , making it easier to spin and maneuver, and the softer gear makes the board more forgiving to control for the particular demands of freestyle riding, such as slower speeds, high landing impacts, quick turns, and imperfect landings. Softer boards allow the snowboarder to press, or butter, with ease, but many freestyle snowboarders, especially halfpipe riders, use stiff boards that have a lot of "pop" to allow them to jump higher and absorb hard landings. Also, freestyle snowboards usually have a true twin tip, in that the sidecut radius is equal on both sides of the board and the stance is centered on the board. This is important because many freestyle snowboarders land switch, or facing the opposite direction, from how they hit their jumps or their tricks, and they need to be able to ride away with ease. Softer boots and boards also allow riders more flexibility in body movement and the ability to reach very convoluted or stretched out, stylish body positions (known as ''tweaks'').

Freestyle snowboarders often 'detune' or dull the edges of their snowboards so as not to catch them on rails or boxes when jibbing.

Freestyle snowboarding is arguably the most popular discipline, and is certainly the focus of most of the Lifestyle marketing in the snowboarding industry. Freestyle is probably most demanded because of the thrill. Freestyle snowboarding can be done almost anywhere that has snow.

Freestyle snowboarding is influenced greatly by Skateboarding . Many Ski Resorts operate Terrain Parks which often simulate the urban skateboard environment, complete with Halfpipe s, Handrail s, Box es, and machine-formed jumps.


Alpine

See Also: Alpine snowboarding


Alpine snowboarding is the practice of turning by carving the snowboard (such that the board turns by using the radius sidecut of the edge), as opposed to skidding the snowboard (where the board is traveling in a different direction than it is pointing). Both traditional snowboard racers (though not necessarily boardercross racers) and recreational carvers are alpine snowboarders.

Alpine riders use hard plastic snowboarding boots, which resemble ski boots, except that they tend to be less stiff in the ankles and have a shortened heel, to minimize hanging over the edge of the snowboard. They tend to angle their feet much more forward than other snowboarders, and also ride narrower boards. Alpine boards are usually, but not always, longer and much stiffer than freeride boards, as the particular demands of carving usually require as much usable edge length as possible. The hard plastic boots stiffens the ankle joint up significantly, making it more difficult to make small ankle adjustments while making skid turns, but making the board much more stable and powerful at higher speeds and the much higher G-forces typically felt by an alpine snowboarder
in carved turns.

An analogy made by some alpine enthusiasts is that freeride and freestyle snowboards are like dirt bikes, and alpine/carving snowboards are like road bikes. (Hence riding a freestyle snowboard on groomed slopes is like riding a dirtbike on a road track or what is called SuperMoto .)


POWDER RIDING


Powder is a term for snow that is very light and fluffy. Powder is known as being the most fun and sometimes challenging skiing and snowboarding, solely because it is so soft. The bad thing about powder is that is if it sits for too long it gets compacted and becomes much harder and sometimes even icy. Generally colder climates sport the lightest, driest powder, and countries like Japan are becoming known as powder havens.

In places where almost all of the runs are groomed, and powder is a rare find, you must venture into the tree trails. Powder makes for much smoother turns and smoother riding. Powder also makes for softer landings and reduced chances of injury compared to man made terrain parks, though landing in deep snow can take some practice. Risks with skiing or snowboarding in powder include Avalanche s, injuries when falling on hidden obstacles such as rocks or tree stumps snowed over, loss of equipment, and the difficulty of getting oneself out of deep powder snow after a fall.


Backcountry

This type of boarding started out with fresh powder-craving snowboarders who, most likely, didn't have the cash to spend at crowded upscale ski parks. In fact, before snowboarding was allowed at resorts, this was the only form of snowboarding; Jake Burton , one of the original pioneers of snowboarding, never even considered resorts; backcountry was what he envisioned as the future of snowboarding. Today, backcountry snowboarding is often for those who have enough cash to afford trips to Alaska or the mountain ranges of the West, to ride outside resorts. Donning Snowshoes or a split-board with skins, the backcountry snowboarder cuts a new path up the side of the mountain in search of the very best vistas and untouched snow. Some of those more cash-endowed riders can even hire snowcats or helicopters to take them where they want to go; this is known as catboarding or heliboarding respectively.

A split-board is a Snowboard cut in half along its length. When apart, the two halves can be used like Cross-country Skis to ascend a hill. When the snowboarder is ready to descend, the halves are mechanically secured together, and the Bindings are repositioned for a snowboarding stance. Without a split-board, snowboarders who want to experience backcountry terrain, bear a little extra burden by carrying their snowboards with a backpack and using snowshoes or cross country skis to ascend.

Snowboarders also use snowmobiles to ride in the backcountry. If the hill is too steep a snowmobile may not make it up the hill. Often snowboarders use snowmobiles to make jumps into the powder.

Safety is key when hiking and riding in the backcountry, especially after a fresh 'dump' of powder. Snow can be extremely unstable, often leading to Avalanche s. Backcountry riders are advised to take extreme caution in all conditions, to carry avalanche equipment including a probe, beacon, and shovel, and never to ride alone in the backcountry. Avalanche equipment can be purchased or rented at outdoor equipment stores. Courses in avalanche safety are also available.


CONSTRUCTION


The various components of a snowboard are:
  • a core: the bulk of a snowboard, the core is the interior of the snowboard. It is typically comprised of a solid material, normally either Wood , Foam , or some Composite Plastic . The properties of the core directly affect important characteristics of the board, such as flexibility and weight.

  • a base: this is the bottom of the board which is made of a graphitic material that is saturated with a wax that creates a very quick smooth, Hydrophobic surface. Because the base of the board comprises the bulk of the board's interaction with the snow, it is important that it be as slippery with respect to the snow as possible. For this reason, different base Waxes are available for different snow conditions. If the board is damaged, a new base pattern can be stone-ground into the board. If the base becomes significantly damaged, the board may become sluggish, or if the damage is deep enough, it may even weaken the core.

  • an edge: a strip of metal, tuned normally to just less than 90-degrees, that runs the length of either side of the board. This sharp edge is necessary to be able to produce enough friction to ride on ice, and the radius of the edge directly affects the radius of carving turns, and in turn the responsiveness of the board. Kinking, rusting, or general dulling of the edge will significantly hinder the ability for the edge to grip the snow, so it is important that this feature is maintained.

  • EGD(tm), Engineered Grain Direction, which is wood grain that goes in different directions over different areas of the core of the board to increase control. This construction feature is proprietary to Burton but is not in all models.


For a more detailed description, see Board Construction .


INSTRUCTION


Snowboard instruction is available at almost every ski resort from certified snowboard instructors. Professional instruction is a good way to learn proper technique, safety policies, mountain etiquette and resort rules.

Snowboard lessons, as with ski lessons, can either be group or private lessons. Group lessons are often cheaper, but often have a high student-teacher ratio, resulting in less individual attention. Private lessons can be taught one-on-one or between a small group. Private lessons are often far more expensive than group, as it is the snowboarding analogue of being privately tutored. The rapport developed between an instructor and a student who returns for multiple lessons is the real benefit derived from private lessons; one is taught better by a teacher who knows them, and a student is more likely to heed the advice of someone they trust.

Typically, beginner snowboard lessons focus on very basic, common snowboarding skills. The first lesson often begins with basic safety policies, stretching, and learning to fall, then progresses to snowboarding with one foot on the board (particularly skating and J-turns). Then students learn how to turn and stop with both feet in. Other important beginner skills to learn are the falling leaf technique, side-slipping, and lift procedures. More advanced techniques that are taught in later lessons are linking turns, edge control, weight distribution, edge pressure, and eventually carving. As students progress in ability they can seek out specialized instruction in areas such as terrain park skills (jumps, rails, and pipes), mogul technique, off-piste riding, powder riding, and racing.


GETTING STARTED


The exact lesson format will different at each resort but you can expect to learn the following skills:

  • Skating or Scooting - Put you front foot into the bindings and push yourself along with the back foot. Keep your weight on the snowboard and allow it to glide. Learns what it feels like to have a big piece of wood strapped to your foot. Important skill for later when you start using lifts.

  • Straight Running - On a very gentle slope strap in both feet and slowly glide down the slope. THe goal here is to learn the basic stance which is used for all advanced techniques. You should watch where you are going, hands slightly away from your body, knees bent, upper body facing same direction as front foot, weight distributed evenly and stay relaxed. Try bending down and standing up while gliding.

  • Standing up on the slope, heelside - Make sure the board is across the slope, you should be sitting facing down the slope with the heelside of the board in the snow. Put one hand on the snow close to your body to push off from, put your other hand out over the board and roll forwards to stand up. Make sure not to overestend and keep the heelside of the board dug in to prevent slipping.

  • Side slipping, heelside - Stand up facing down the slope with the board across the slope and the heelside of the board firmly dug into the snow. Slowly push down on your toes to flatten the board to the snow and get it moving down the fall line. Smoothly roll back onto your heels to slow the board or onto your toes to speed the board up. Relax and stay smooth!

  • Side slipping, toeside - Stand up facing up the slope with the board across the slope and the toeside of the board firmly dug into the snow. Slowly push down on your heels to flatten the board to the snow and get it moving down the fall line. Smoothly roll back onto your toes to slow the board or onto your heels to speed the board up. Relax and stay smooth!

  • Falling leaf, heelside - Start doing a normal heelside descent and then put pressure on the toes of one foot to cause that end of the snowboard to turn down the slope, let the board run a little and then roll the same foot back onto the heel to stop the slide. Try the other foot. Alternate feet crossing back and forth the slope in a falling leaf pattern.

  • Falling leaf, toeside - Start doing a normal toeside descent and then put pressure on the heel of one foot to cause that end of the snowboard to turn down the slope, let the board run a little and then roll the same foot back onto the toes to stop the slide. Try the other foot. Alternate feet crossing back and forth the slope in a falling leaf pattern.

  • Garland, heelside - Same as falling leaf heelside, press down on the toes of one foot to turn the board but this time allow the board to turn until it is pointing directly down the slope before rolling back on the heel of the same foot to flatten out. Also known as J-turns.

  • Garland, toeside - Same as falling leaf toeside, press down on the heel of one foot to turn the board but this time allow the board to turn until it is pointing directly down the slope before rolling back on the toes of the same foot to flatten out. Also known as J-turns.

  • Linked turns - Same as the garland but instead of recovering and turning back keep the turn going right around. Start out heelside - end up toeside. Start from both heelside and toeside.

  • Leg turning - On heelside turns turn the front leg into the slope to turn better and on the toeside rotate the front leg away from the slope.

  • Carving - Aggressively pitch the board hard over onto its edge to carve, keep transitions short and as you pick up speed start your transitions earlier and earlier. In carving the board is always either on one edge or the other and carves a track in the snow.

  • Powder - Snowboards were designed for this, powder is easier on a snowboard than on skis but keep your speed up, keep the nose of the board up by putting more weight on the back foot than normal and don't edge over too hard.



Top 8 Tips for the beginning snowboarder:
  • Snowboarding is mostly done on either the heelside or toeside edge of the snowboard. You have little control when the snowboard is flat.

  • Turn the board by pressing down with either your heel or toes, don't throw your upper body around. Try boarding with your hands on your hips to force you to use your feet to turn.

  • Keep your knees bent, especially when slowing down, to absorb the bumps.

  • Keep your head and shoulders up and watch where you are going. Don't look at the snowboard.

  • Relax and stay smooth! Nervous, jerky movements will result in frequent falls.

  • When not strapped to your feet keep the snowboard bindings side DOWN in the snow to prevent the snowboard from sliding down the mountain without you.

  • Keep the snowboard perpendicular to the slope when sitting or getting up to prevent it moving.

  • Keep your hands over the ends of the board for balance.



If you remember nothing else, remember this: Knees bent, relax!


Associations



SAFETY


Wearing safety gear is highly recommended (People have died from snowboarding accidents). The body parts most affected by injuries are the Wrist s, the Tailbone , and the Head . Useful safety gear includes wrist guards, padded or protected snowboard pants and a helmet. Goggles are also used by most people, even though they are not a necessity.

Padding can be useful on other body parts like hips, knees, spine, shoulders, and in the obvious places based on gender. Padding can be specialized for snowboarding, or it can cross sports. For example, knee pads used for volleyball can be useful for snowboarding. They can be useful for the many times that a snowboard rider may wish to rest on the knees, such as after coming to a stop.

Mountain maintenance is a very important aspect of safety. In places where the mountains are steep and the snow is deep, avalanches are extremely common. In order to keep these parts of the mountain safe, Ski Patrol will set off dynamite to control the avalanche. The idea behind this is that the chances of someone being caught in a large avalanche is less likely. This maintenance is done on a day to day basis.

General safety tips for winter sports, alpine conditions and skiing should also be respected.


VIDEOS AND MOVIES

Snowboard videos have become a huge part of the sport. Each season, many different snowboard films are released, usually in September. Production companies work all year developing these videos.

Videos have evolved to become the backbone of the sport. Many companies rely heavily on their professional riders to help in promoting their product in these videos. Professionals push the envelope more and more every year. Snowboarders can then emulate these pros by buying the same board they ride. These videos began as a way to show what can be done on a snowboard and it has now become the major marketing tool in the industry.

Snowboarding is such a progressive sport. In order to capture this progression it must be done on film. Film crews search near and far to find new ways to wow the snowboarding public. The search for progression only increases the popularity of snowboarding.


NEW DEVELOPMENTS

The combination of kiteboarding technology with snowboarding has led to the creation of a new sport, Snowkiting . Using the pull of the wind, snowkiters are able to make massive jumps and travel uphill.


SEE ALSO



EXTERNAL LINKS



REFERENCES

  • Hart, Lowell (1997). ''The Snowboard Book: A Guide for All Boarders''. W.W. Norton & Company. ISBN 0-393-32692-0