| Ringing Signal |
Article Index for Ringing |
Website Links For Ringing |
Information AboutRinging Signal |
|
Ringing is said to be "tripped" when the impedance of the line reduces to about 600 Ohms when the telephone handset is lifted off the switch-hook. This causes the telephone call to be answered, and the telephone exchange immediately removes the ringing signal from the line and connects the call. This is the source of the name of the problem called "ring-trip", which occurs when the ringing signal on the line causes a low-resistance short between the conductors, which trips the ring out before the subscriber's actual telephone has a chance to ring (for more than a very short time); this is common with wet weather and improperly installed lines. Early research showed that people would wait until the phone stopped ringing before picking it up. Breaks were introduced into the signal to avoid this problem, resulting in the common ring-pause-ring pattern used today. In early Party Line systems this pattern was a Morse Code letter indicating who should pick up the phone, but today, with individual lines, the only surviving patterns are a single ring (in the USA ) and double-ring (in the UK ), originally Morse code letters T and M respectively. However, a service akin party line ringing is making a comeback in some small office and home office situations allowing Facsimile machines and telephones to share the same line but have different telephone numbers; this CLASS feature is usually called Distinctive Ring ing generically, though carriers assign it Trademark ed names such as "Smart Ring". Caller ID signals are sent during the silent interval between the first and second bursts of the ringing signals. The interrupted ring signal was designed to attract attention and studies showed that an intermittent two tone ring was the easiest to hear. This had nothing to do with the coded ringing that was used on party line. RELATED LINKS |
|
|