| Optical Communication |
Article Index for Optical |
Articles about Optical Communication |
Website Links For Optical |
Information AboutOptical Communication |
| CATEGORIES ABOUT OPTICAL COMMUNICATION | |
| communication | |
|
An optical communication system consists of a '' Transmitter '', which encodes a ''message'' into an optical '' Signal '', a '' Channel '', which carries the signal to its destination, and a ''receiver'', which reproduces the message from the received optical signal. FORMS OF OPTICAL COMMUNICATION There are many forms of non-technological optical communication, including Body Language and Sign Language . Techniques such as Semaphore , Ship Flags , Smoke Signals , and Beacon s; fires were the earliest form of technological optical communication. The Heliograph uses a Mirror to Reflect sunlight to a distant observer. By moving the mirror the distant observer sees flashes of light that can be used to send a prearranged signaling code. Navy Ship s often use a Signal Lamp to signal in Morse Code in a similar way. Distress Flare s are used by mariners in Emergencies , while Lighthouse s and Navigation Light s are used to communicate navigation hazards. Aircraft use the Landing Light s at Airport s to land safely, especially at night. Aircraft landing on an Aircraft Carrier use a similar system to land correctly on the carrier deck. The light systems communicate the correct position of the aircraft relative to the best landing Glideslope . Optical Fiber is the most common medium for modern digital optical communication. Free-space Optical Communication is also used today in a variety of applications. OPTICAL FIBER COMMUNICATION Optical Fiber is the most common type of channel for optical communications, however other types of optical Waveguide s are used within communications gear, and have even formed the channel of very short distance (e.g. chip-to-chip) links in laboratory trials. The transmitters in optical fiber links are generally Light-emitting Diode s (LEDs) or Laser Diode s. Infrared light, rather than Visible Light is used more commonly, because optical fibers transmit infrared wavelengths with less Attenuation and Dispersion . LEDs are generally restricted to low data rates, up to about 100 Megabits per second (Mb/s). Lasers are used for higher data rates. These devices are often ''directly Modulated '', that is the light output is controlled by a current applied directly to the device. For very high data rates or very long distance ''links'', a laser source may be operated Continuous Wave , and the light modulated by an external device such as an Electroabsorption Modulator or Mach-Zehnder Interferometer . External modulation increases the achievable link distance by eliminating laser Chirp , which broadens the Linewidth of directly-modulated lasers, increasing the Chromatic Dispersion in the fiber. Receivers used in fiber links use P-i-n Diode s, Avalanche Photodiode s, or other semiconductor devices as the optical-electrical converter. The optical-electrical converters is typically coupled with a Transimpedance Amplifier and Limiting Amplifier to produce a digital signal in the electrical domain from the incoming optical signal, which may be attenuated and distorted by passing through the channel. Further signal processing such as clock recovery from data (CDR) by a Phase-locked Loop may also be applied before the data is passed on. To increase the link distance, early optical fiber links contained ''repeaters'', which were essentially back-to-back receivers and transmitters that converted the signal from the optical to electrical domain and back to an optical signal again and essentially broke a long link into many short ones. Since its invention, however, the Erbium-doped Fiber Amplifier (EDFA), has replaced the repeater in most telecommunication links. By using different light wavelengths (or colors) multiple communications can be sent optically, in what is known as Wavelength Division Multiplexing (WDM). This requires a ''wavelength division Multiplexer '' in the transmitting equipment and a ''wavelength division demultiplexer'' (essentially a Spectrometer ) in the receiving equipment. Arrayed Waveguide Grating s are commonly used for multiplexing and demultiplexing in WDM. FREE-SPACE OPTICAL COMMUNICATION IrDA is an example of low-data-rate, short distance free-space optical communications using LEDs. RONJA is an example of 10 Mbit/s 1.4 km full-duplex optical point-to-point link. SEE ALSO REFERENCES |
|
|