Lumped Component Website Links For
Component 		 

Information About

Lumped Component
  CATEGORIES ABOUT LUMPED COMPONENT
   
electronics
   
mechanics
   
acoustics
   
components
   
APPAREL
BABY
BEAUTY
BOOKS
CAR TOYS
CELL PHONES
DVD'S
ELECTRONICS
GOURMET FOOD
GROCERIES
HEALTH & PERSONAL
HOME & GARDEN
JEWELRY
MUSIC
MUSIC INSTRUMENTS
OFFICE PRODUCTS
SOFTWARE
SPORTING GOODS
TOOLS & HARDWARE
TOYS
VIDEO GAMES
SHOPPING HOME
MORE SHOPPING...



In general, the lumped component model is a way of simplifying the behaviour of spatially distributed systems into a Topology consisting of discrete entities that approximate the behaviour of the distributed system under certain assumptions.

It is useful in Electronics , Mechanics and Acoustics .


LUMPED COMPONENT MODEL IN ACOUSTICS


In this context, the lumped component model extends the distributed concepts of Acoustic Theory subject to approximation. In the acoustical lumped component model, certain physical components with acoustical properties may be approximated as behaving similarly to standard electronic components or simple combinations of components.

  • A rigid-walled cavity containing air (or similar compressible fluid) may be approximated as a Capacitor whose value is proportional to the volume of the cavity. The validity of this approximation relies on the shortest wavelength of interest being significantly (much) larger than the longest dimension of the cavity.


  • A Reflex Port may be approximated as an Inductor whose value is proportional to the effective length of the port divided by its cross-sectional area. The effective length is the actual length plus an End Correction . This approximation relies on the shortest wavelength of interest being significantly larger than the longest dimension of the port.


  • Certain types of damping material can be approximated as a Resistor . The value depends on the properties and dimensions of the material. The approximation relies in the wavelengths being long enough and on the properties of the material itself.


  • A Loudspeaker drive unit (typically a Woofer or Subwoofer drive unit may be approximated as a series connection of a zero- Impedance Voltage source, a Resistor , a Capacitor and an Inductor . The values depend on the specifications of the unit. The approximation depends on the specifications of the unit and the wavelength of interest.