| Long-tailed Pair |
Article Index for Long-tailed |
Website Links For Pair |
Information AboutLong-tailed Pair |
| CATEGORIES ABOUT LONG-TAILED PAIR | |
| multi-stage transistor amplifiers | |
|
A long-tailed pair or LTP is a common design in Electronics for implementing a Differential Amplifier . It consists of two Bipolar Junction Transistor s (BJTs), FET s, or Vacuum Tube s (valves), connected so that the BJT emitters (or FET sources or vacuum tube cathodes) are connected together. This gives the circuit two inputs. The output is taken from one or other of the pair, though some designs may use both. In a long-tailed pair formed using BJTs, the emitters are connected together, and then through a Resistor or Constant Current Source to ground or to a negative supply (for LTP using NPN transistors). In this form, one of the transistors can be thought of as an amplifier operating in Common Emitter configuration, and the other as an Emitter Follower , feeding the other input signal into the emitter of the first stage. Since a transistor will amplify the current flowing between base and emitter, it follows that the current flowing in the collector circuit of the first transistor is proportional to the difference between the two inputs. However since the circuit is totally symmetrical, either element can be viewed as an amplifier or as an emitter follower, understanding does not depend on which role you assign to which device. Long-tailed pairs are frequently used in circuits that implement linear amplifiers with Feedback , and in Operational Amplifier s. |
|
|