| Inline Skates |
Article Index for Inline |
Website Links For Inline |
Information AboutInline Skates |
| CATEGORIES ABOUT INLINE SKATES | |
| rollerskates | |
| rollerskating equipment | |
|
The earliest roller skates were of the inline design, but these were later superseded by quad skates, the design of which made skating curved edges easier. During the late 1980s and early 1990s, the popularity of inline skates had a strong resurgence, led by the company Rollerblade , Inc., who promoted and popularized inlines; their skates became so successful that the term "Rollerblades" has become synonymous with "inline skates", and many people call any form of skating "Rollerblading," although this is an unauthorized Genericized Trademark . PARTS A skate is composed of a ''boot'', which is worn on the foot. To the boot is attached a ''frame'', which holds the ''wheels'' in place. '' Bearings '' allow the wheels to rotate freely around an axle. There are different types of inline skates for different types of skating such as Aggressive Skating , Speed Skating , and Artistic Inline Skating . Those differ in the boots, frames and wheels that are used. The boot For most skating a high boot is used, which provides more ankle support and is easier to skate in, particularly for beginners. Speed skaters often use lower boots allowing more ankle flexion. For recreational skating a soft boot is used for greater comfort, but many other disciplines prefer a harder boot, either to protect the foot against impact or for better control of the skate. The boot may also contain shock absorbent padding for comfort. The frame Typical recreational skates use frames built out of high-grade polyurethane (plastic). Low-end department or toy store skate frames may be composed of other types of plastic. Speed skate frames are usually built out of Carbon or extruded Aluminum (more expensive but more solid), or even stamped aluminum, which is then folded into a frame (cheaper but less sturdy). Carbon frames are expensive but more flexible, making for a smoother ride at the expense of worse power transfer between the leg and the wheels. In general, carbon frames weigh about 160-180 grams. Aluminum can weigh from 170 to 220 grams. Frame length ranges from around 230mm for short-framed four wheel skates (used for example in inline hockey), up to about 325mm for a five wheel racing frame. Bearings Bearings allow the wheels to rotate freely and smoothly. Bearings are usually rated on the ABEC Scale , a measure of the manufactured precision tolerance, ranging from 1 (worst) to 9 (best) in odd numbers. The ABEC standards were originally intended for high-speed machinery and not skating applications. While higher rated bearings are generally better in overall quality, whether they automatically translate to more speed is still questionable . The quality of the steel used is also very important, but is not rated by the ABEC scale. In any case, the general opinion is that if you have the money or inclination, higher ABECs certainly can't hurt. Note that bearings alone won't make up for poor technique or lack of fitness. Newer bearings on the market now use ceramic ball bearings instead of steel. The merits of ceramic versus steel are probably still to be determined as well. Wheels Wheel sizes vary depending on the skating style:
In general the bigger the wheel, the faster the skate. However, large wheels take more energy to start rolling. Smaller wheels allow faster acceleration, maneuverability, and a lower center of gravity. Wheel hardness is measured on the A scale (see Durometer ) and usually ranges between 78A-86A (higher numbers are harder). Harder wheels are faster and more durable, but soft wheels may have better grip (grip is determined by many factors, and wheel manufacture is arguably more important than durometer) and less affected by road bumps. Wheel profiles and thicknesses again vary by application. Elliptic profiles minimise friction for a faster ride; more rounded profiles have better grip and are more stable. EXTERNAL LINKS
|
|
|