| Gold Mine |
Article Index for Gold |
Website Links For Gold |
Information AboutGold Mine |
| CATEGORIES ABOUT GOLD MINING | |
| gold mininggold mining | |
| gold | |
| mining | |
| mining by mineral | |
|
]] GOLD PROSPECTING See Also: Gold prospecting Gold panning is a manual technique of sorting gold. Wide, shallow pans are filled with sand and gravel that may contain gold. Water is added and the pans are shaken, sorting the gold from the rock and other material. The gravel is usually removed from streambeds, often at a bend in the stream, where the weight of gold causes it to settle out of the water flow. This type of gold found in streams or dry streams are called placer deposits. HYDRAULIC MINING Hydraulic Mining is a type of Placer Mining used in areas where large amounts of loose gravel and sand or soil are poorly packed and may be washed away with a heavy stream of water. Fire hoses (Water cannons) are sometimes used to strip away entire hills of loose gravel, which are then run through a sluice (a wooden trough with ripples). Gold, being heavier, does not move as easily as other material in the sluice. This technique can damage the environment, causing mud in streams below the mining site and erosion damage at the site itself. HARD ROCK MINING Hard rock mining is removing rock from the ground, in which miners tunnel and blast into rock, seeking volcanic deposits or sedimentary deposits of gold. Veins of gold ore are often found several inches or feet wide in certain rock formations in a volcanic deposit and in certain bed layers in a sedimentary deposit, hence the minerals may be removed, collected, and treated to process the gold and other valuable metals (such as silver) from them. This technique uses the most energy but makes the most money and produces most of the world's gold. CYANIDE PROCESS Cyanide extraction of gold may be used in areas where fine-gold bearing rocks are found. Sodium Cyanide solution is mixed with finely-ground rock that is proven to contain gold and/or silver, and is then separated from the ground rock as gold cyanide and/or silver cyanide solution. Zinc is added to the solution, precipitating out residual zinc, as well as the desirable silver and gold metals. The zinc is removed with Sulphuric Acid , leaving a silver and/or gold sludge that is generally smelted into a dore' that is shipped to a metals refinery for final processing into 99.9999% pure metals. The cyanide technique is very simple and straightforward to apply and a popular method for low-grade gold and silver ore processing. Like most industrial chemical processes, there are potential environmenftal hazards presented with this extractive method; in addition to the high toxicity presented by the cyanide itself. However, despite more than 100-years of cyanide use in the United States mining industry, there are no known accidental mining deaths attributed to the use of cyanide. SEE ALSO |
|
|