| Field Ion Microscope |
Article Index for Field |
Limousines in Field |
Website Links For Field |
Information AboutField Ion Microscope |
| CATEGORIES ABOUT FIELD ION MICROSCOPE | |
| microscopes | |
|
It was the first technique by which individual atoms could be spatially resolved. The technique was pioneered by Erwin Müller . Images of atomic structures of Tungsten were first published in 1951 in the journal ''Zeitschrift für Physik''. In FIM, a sharp metal tip is produced and placed in an Ultra High Vacuum chamber, which is backfilled with an imaging gas such as Helium or Neon . The tip is cooled to cryogenic temperatures (20–100 K). A positive Voltage of 5000 to 10 000 Volt s is applied to the tip. Gas atoms adsorbed on the tip are ionized by the strong Electric Field in the vicinity of the tip (thus, "field ionization"), becoming positively charged and being repelled from the tip. The curvature of the surface near the tip causes a natural magnification — Ion s are repelled in a direction roughly perpendicular to the surface (a "point projection" effect). A detector is placed so as to collect these repelled ions; the image formed from all the collected ions can be of sufficient resolution to image individual atoms on the tip surface. Unlike conventional microscopes, where the spatial resolution is limited by the wavelength of the particles which are used for imaging, the FIM is a projection type microscope with atomic resolution and an approximate magnification of a few million times. SEE ALSO EXTERNAL LINKS |
|
|