Digital Loop Carrier Article Index for
Digital 		Website Links For
Digital 		 

Information About

Digital Loop Carrier
  CATEGORIES ABOUT DIGITAL LOOP CARRIER
   
local loop
   
APPAREL
BABY
BEAUTY
BOOKS
CAR TOYS
CELL PHONES
DVD'S
ELECTRONICS
GOURMET FOOD
GROCERIES
HEALTH & PERSONAL
HOME & GARDEN
JEWELRY
MUSIC
MUSIC INSTRUMENTS
OFFICE PRODUCTS
SOFTWARE
SPORTING GOODS
TOOLS & HARDWARE
TOYS
VIDEO GAMES
SHOPPING HOME
MORE SHOPPING...




REASONS FOR USING DLCS

''Loop carrier systems'' were ordained to solve two problems: to reduce copper cable pair
requirements; and to overcome electrical constraints on long loops. A number of pressing issues supplied motivation for technology that would reduce cable pair deployments. Those issues include the following:

  • Imminent cable supply shortages (especially dependence on newly-mined copper)

  • Cable route congestion (particularly in urban streets, bridges, and buildings)

  • Construction challenges (in areas of difficult terrain)

  • Expensive cable including the associated labor-intensive installation work


Long loops, such as those terminating at more than 18,000 feet from the Central Office , pose
electrical challenges. When the subscriber goes Off-hook , a cable pair behaves like a single loop
Inductance Coil with a -48 Vdc Potential and an Electrical Current flow of between 20 - 50 MA dc. Electrical current values vary with cable length and gauge. A minimum current of around 20 mA dc is required to convey terminal signaling information to the network. There is also a minimum power level
required to provide adequate volume for the voice signal. A variety of schemes were implemented
before DLC technology to offset the Impedance long loops offered to signaling and volume levels. They included the following:
  • Use heavy-gauge conductors – Up to 19 Gauge (approximately the gauge of pencil lead), which is costly and bulky. The heavy-gauge cables yielded far fewer pairs per cable and led to early congestion in cable routes, especially in bridge crossings and other areas of limited space.

  • Increase battery Voltage – This violation of operating standards could pose a safety hazard.

  • Add Amplifier s to power the voice signal on long loops. This however, requires volumes of auxiliary equipment, a myriad number of cross wiring points, and extensive record-keeping.

  • Add signal regeneration and signal extension equipment – The comments regarding amplifiers apply here as well.

  • Add Loading Coil s to reduce the attenuation of voice signals over long loops. These have detrimental effect to new transmission technologies using the local loop, like DSL , and must be removed.


DLC eliminates the need for these remedies by extending out closer to the customer the Line Card which digitizes the voice signal for use by the PSTN . Once the voice signal is digitized, it is easily manipulated and is no longer subject to the vagaries of the Analog loop caused by distance, Impedance , Attenuation and Noise .

The DLC solution was dubbed " Pair Gain " (from the days when DLC was deployed to recover copper pairs in the loop plant environment).


CONFIGURATION

In a typical configuration, DLC remote terminals are installed in new neighborhoods or buildings as a means of reducing the labor and complexity of installing individual local loops from the customer to the Central Office (CO). A single coaxial or fiber optic cable from the CO to the DLC remote terminal replaces much bulky and failure prone wiring. DLC remote terminals are typically stored in Serving Area Interface s–metal cabinets alongside or near roadways that overlie communications rights-of-ways.

With the growth in popularity of Digital Subscriber Line (DSL) and the benefits provided by shorter metallic loops used with DLC systems, digital loop carriers are sometimes integrated with Digital Subscriber Line Access Multiplexer s (DSLAM), both systems then taking advantage of the digital transmission link from the DLC to the CO.

" and, ultimately " Fiber To The Home " where an optical network unit (ONU) is located at each home.