| Diamond Anvil Cell |
Article Index for Diamond |
Website Links For Diamond |
Information AboutDiamond Anvil Cell |
| CATEGORIES ABOUT DIAMOND ANVIL CELL | |
| materials science | |
| condensed matter physics | |
| geophysics | |
| physical chemistry | |
| physics experiments | |
|
A diamond anvil cell (DAC), is a device used by Physicists to exert extreme Pressure s on a material. It consists of two opposing cone-shaped Diamond s squeezed together by a lever arm. The resultant high pressures - of as much as a million atmospheres - are produced when force is applied to small areas of the opposing diamond faces. The device has been used to simulate the extreme pressures existing in the heart of Planet s, often creating new substances in the process. Notable examples are the production of Metallic Hydrogen , found in the Gas Giant planets, and Perovskite , thought to be the major component of the Earth's Mantle . PRINCIPLE The operation of the Diamond Anvil Cell relies on a simple principle: Pressure Therefore high pressure can be achieved by applying a moderate Force on a sample with a small area, rather than applying a large Force on a large area. In order to prevent deformation and even breakage of the Anvil s that apply the force, they must be made from a very hard and virtually incompressible material - diamond. HISTORY s, they were made of the hardest known material – a single Crystal Diamond . The first prototypes were limited in their pressure range and there was not a reliable way to Calibrate the pressure. During the next decades many investigators have used DACs and following their experience many innovative improvements were introduced, the most important being the use of Gasket s and the Ruby pressure calibration. The DAC evolved to be the most powerful lab device for generating static high-pressure. The range of static pressure attainable today extends to the pressures prevailing in the earth’s center (~360 GPa). COMPONENTS There are many different DAC designs but all of them have three main components: (1) The Force -generating device - relies on the operation of either a Lever arm, tightening Screw s, or Gas Pressure applied to a Membrane . In all cases the Force is Uniaxial and is applied to the tables (bases) of the two Anvil s (2) Two opposing Diamond Anvil s - made of high Gem quality, flawless diamonds, usually with 16 facets. They typically weight 1/8 to 1/3 Carat . The culet (tip) is ground and polished to a hexadecagonal surface parallel to the table. The culets of the two Diamond s face one another, and must be perfectly Parallel in order to produce uniform Pressure and to prevent dangerous Strain s. (3) in a cavity between the Diamond s, and to prevent anvil failure by supporting the Diamond tips, thus reducing Stresses at the edges of the culet. USES Its relative simplicity and compactness makes the DAC a diverse tool that can be accommodated to a variety of experiments. Some of the contemporary DACs can easily fit into a Cryostat for low-temperature measurements, and for use with a Superconducting Electromagnet . In addition to being hard, Diamonds have the advantage of being transparent to a wide range of the Electromagnetic Spectrum - from Infrared to Gamma Rays , with the exception of the far Ultraviolet and soft X-rays . This makes the DAC a perfect device for various Spectroscopic experiments. EXTERNAL LINKS
References
|
|
|