Information AboutCommon Base |
| CATEGORIES ABOUT COMMON BASE | |
| single-stage transistor amplifiers | |
|
In Electronics , common base or '''grounded-base''' refers to a type of bipolar Transistor circuit configuration in which a transistor is connected such that its base terminal is wired to the Ground or "common" rail of the circuit (or can be considered so for AC signals). In this configuration, the input signal is applied to the emitter, being the output at the collector. This arrangement is not used as much as other configurations in low frequency circuits but is often employed for Amplifier s that require an unusually low Input Impedance , for example to act as a Preamplifier for moving-coil Microphone s. This configuration has also good high-frequency behaviour, which makes it very useful in the implementation of high-frequency amplifiers, for example for VHF and UHF , where the very low capacitance from output to input and, therefore, a high cutoff frequency, is of critical importance. This low capacitance is due, in part, to the screening effect of the base which is connected to ground as far as signal frequencies are concerned. Another significant application of this configuration is as current buffer, as the relation between the input current, IE and the output current, IC, is approximately 1. CHARACTERISTICS (The Parallel lines indicate Components In Parallel .) Inherent voltage Gain : :With CE: : |
|
|