Information AboutClean Room |
| CATEGORIES ABOUT CLEANROOM | |
| rooms | |
| integrated circuits | |
| semiconductor device fabrication | |
|
A cleanroom is an environment, typically used in Manufacturing or scientific research, that has a low level of environmental Pollutant s such as dust, airborne Microbes , Aerosol particles and chemical vapors. More accurately, a cleanroom has a ''controlled'' level of contamination that is specified by the number of particles per meter-cubed and by maximum particle size. OVERVIEW Cleanrooms can be very large. Entire manufacturing facilities can be contained within a cleanroom with factory floors covering thousands of square meters. They are used extensively in Semiconductor Manufacturing , Biotechnology , the Life Sciences and other fields that are very sensitive to environmental contamination. The Air entering a cleanroom from outside is Filter ed to exclude dust, and the air inside is constantly recirculated through high efficiency particulate air ( HEPA ) and ultra low penetration air ( ULPA ) filters to remove internally generated contaminants. Staff enter and leave through Air Lock s (sometimes including an Air Shower stage), and wear protective clothing such as hats, face masks, boots and cover-alls. Equipment inside the cleanroom is designed to generate minimal air contamination. Common materials such as Paper , Pencil s, and Fabric s made from natural fibers are often excluded. Low-level cleanrooms are often not Sterile (i.e., free of uncontrolled microbes) and more attention is given to airborne particles. Particle levels are usually tested using a Particle Counter . Some cleanrooms are kept at a higher Air Pressure so that if there are any leaks, the air rushes outside. This is similar to the lower pressure used in biological hot zones to keep the microbes inside. Cleanroom HVAC systems often control the Humidity to low levels, such that extra precautions are necessary to prevent Electrostatic Discharge s. Entering a cleanroom usually requires wearing a Cleanroom Suit . CLEANROOM CLASSIFICATIONS ''The following is adapted from Rockwell Automation :'' The cleanroom standards tables indicate the maximum number of allowable particles of the indicated size per cubic foot (for US FED) or cubic meter (for ISO) for each class. US FED STD 209E cleanroom standards NOTE: US FED STD 209E was canceled November 29, 2001. Reference: http://www.iest.org/publctns/fedstd209.htm ISO 14644-1 cleanroom standards Cleanroom class comparison SEE ALSO EXTERNAL LINKS |
|
|