Information AboutAvailability |
| CATEGORIES ABOUT AVAILABILITY | |
| telecommunications terms | |
For availability as a form of Cognitive Bias , see In Telecommunication s and Reliability Theory , the term availability has the following meanings: 1. The degree to which a System , subsystem, or equipment is operable and in a committable state at the start of a mission, when the mission is called for at an unknown, i.e., a random, Time . Simply put, availability is the proportion of time a system is in a functioning condition. Note 1: The conditions determining operability and committability must be specified. Note 2: Expressed mathematically, availability is 1 minus the Unavailability . 2. The ratio of (a) the total time a Functional Unit is capable of being used during a given interval to (b) the length of the interval. Note 1: An example of availability is 100/168 if the unit is capable of being used for 100 hours in a week. Note 2: Typical availability objectives are specified either in decimal fractions, such as 0.9998, or sometimes in a logarithmic unit called Nine s, which corresponds roughly to a number of nines following the decimal point, such as "five nines" for 0.99999 reliability. Source: from Federal Standard 1037C in support of MIL-STD-188 REPRESENTATION The most simple representation for Availability is as a ratio of the expected value of the uptime of a system to the aggregate of the expected values of up and down time, or : If we define the status function as : therefore, the availability is represented by : : . Average ability must be defined on an interval of the real line. If we consider an arbitrary constant , then average availability is represented as : . Limiting (or steady-state) availability is represented by : Limiting average availability is defined is also defined on an interval as, : LITERATURE Availability is well established in the literature of Stochastic Modeling and Optimal Maintenance . Barlow and Proschan define availability of a repairable system as "the probability that the system is operating at a specified time t." While Blanchard [1998 gives a qualitative definition of availability as "a measure of the degree of a system which is in the operable and committable state at the start of mission when the mission is called for at an unknown random point in time." Lie, Hwang, and Tillman [1977] developed a complete survey along with a systematic classification of availability. Availability measures are classified by either the time interval of interest or the mechanisms for the system Downtime . If the time interval of interest is the primary concern, we consider instantaneous, limiting, average, and limiting average availability. The aforementioned definitions are developed in Barlow and Proschan Lie, Hwang, and Tillman [1977 , and Nachlas The second primary classification for availilability is contingent on the various mechanisms for downtime such as the inherent availability, achieved availability, and operational availability. (Blanchard [1998 , Lie, Hwang, and Tillman Mi [1998 gives some comparison results of availability considering inherent availability. Availability considered in maintenance modeling can be found in Barlow and Proschan for replacement models, Fawzi and Hawkes [1991 for an R-out-of-N system with spares and repairs, Fawzi and Hawkes for a series system with replacement and repair, Iyer [1992 for imperfect repair models, Murdock for age replacement preventive maintenance models, Nachlas [1998, 1989 for preventive maintenance models, and Wang and Pham [1996] for imperfect maintenance models. SEE ALSO EXTERNAL LINKS |
|
|