Ray (optics) Article Index for
Ray 		Website Links For
Ray 		 

Information About

Ray (optics)
SHOPPER'S DELIGHT
 
Shop For:  
Department
Price Minimum:
Price Maximum:
      



There are many special rays that are used in optical modelling to analyze an optical system. These are defined and described below, grouped by the type of system they are used to model.


INTERACTION WITH SURFACES

  • An incident ray is a ray of light that strikes a surface. The angle between this ray and the perpendicular or Normal to the surface is the Angle Of Incidence .

  • The reflected ray corresponding to a given incident ray, is the ray that represents the light reflected by the surface. The angle between the surface normal and the reflected ray is known as the Angle Of Reflection . The Law of Reflection says that for a Specular (non-scattering) surface, the angle of reflection always equals the angle of incidence.

  • The refracted ray or '''transmitted ray''' corresponding to a given incident ray represents the light that is transmitted through the surface. The angle between this ray and the normal is known as the Angle Of Refraction , and it is given by Snell's Law .

  • If the material is Birefringent , the refracted ray may split into ordinary and '''extraordinary rays''', which experience different Indexes Of Refraction when passing through the birefringent material.


''See also:'' Reflection , Refraction , Absorption , Birefringence .


OPTICAL SYSTEMS

  • A meridional ray is a ray that is confined to the '''y'''-'''z''' plane, where '''z''' points along the Optical Axis of the system, and '''y''' is perpendicular to it.

  • The marginal ray in an optical system is the meridional ray that starts at the point where the object crosses the optical axis, and touches the edge of the Aperture Stop of the system. This ray is useful, because it crosses the optical axis again at the locations where an image will be formed. The distance of the marginal ray from the optical axis at the locations of the Entrance Pupil and Exit Pupil defines the sizes of each pupil (since the pupils are Image s of the aperture stop).

  • The chief ray in an optical system is the meridional ray that starts at the edge of the object, and passes through the center of the aperture stop. This ray crosses the optical axis at the locations of the pupils. The distance between the chief ray and the optical axis at an image location defines the size of the image.

  • A skew ray is a ray that originates from an object point in the '''y'''-'''z''' plane, but does not propagate in this plane. Such a ray will intersect the entrance pupil at some arbitrary coordinates (''xp'',''yp'').

  • A tangential ray is a ray that intersects the entrance pupil at ''xp''=0. This is just another name for a meridional ray.

  • A sagittal ray or '''transverse ray''' is a skew ray that intersects the pupil at ''yp''=0.



FIBER OPTICS

  • A meridional ray is a ray that passes through the Axis of an Optical Fiber .

  • A Guided Ray , '''bound ray''', or '''trapped ray''' is a ray in a Multimode Optical Fiber , which is confined by the Core . For Step Index Fiber , light entering the fiber will be guided if it makes an angle with the fiber axis that is less than the fiber's Acceptance Angle .

  • A leaky ray or '''tunneling ray''' is a ray in an optical fiber that geometric optics predicts would Totally Reflect at the boundary between the Core and the Cladding , but which suffers loss due to the curved core boundary.


''See also:'' Numerical Aperture


SEE ALSO



REFERENCES