| Triple Point |
Article Index for Triple |
Website Links For Triple |
Information AboutTriple Point |
| CATEGORIES ABOUT TRIPLE POINT | |
| chemical properties | |
| thermodynamics | |
| SHOPPER'S DELIGHT | |
|
For example, the triple point temperature of Mercury is -38.8344 °C at a pressure of 0.2 mPa. The triple point of water is used to define the Kelvin , the SI unit of thermodynamic temperature. The number given for the temperature of the triple point of water is an exact definition rather than a measured quantity. TRIPLE POINT OF WATER The single combination of pressure and temperature at which Water , Ice , and Water Vapour can coexist in a stable equilibrium occurs at exactly 273.16 Kelvin s (0.01 °C) and a pressure of 611.73 Pascal s (ca. 6 Millibars , .006037 Atm ). At that point, it is possible to change all of the substance to ice, water, or steam by making infinitesimally small changes in pressure and temperature. (Note that the pressure referred to here is the Vapor Pressure of the substance, not the total pressure of the entire system.) Water has an unusual and complex Phase Diagram , although this does not affect general comments about the triple point. At high temperatures, increasing pressure results in first liquid, and then solid water (above around Pa a crystalline form of ice which is denser than water forms). At lower temperatures the liquid state ceases to appear with compression causing the state to pass directly from gas to solid. At a constant pressure higher than the triple point, heating ice necessarily passes from ice to liquid then to . A Triple Point Cell is useful for the Calibration of devices used in Temperature Measurement . The zero-elevation or "sea level" of Mars is defined by the height at which the atmospheric pressure corresponds to the triple point of water. SEE ALSO
EXTERNAL LINKS |