| Dodge Challenger |
Article Index for Dodge |
Website Links For Dodge |
Information AboutDodge Challenger |
| CATEGORIES ABOUT DODGE CHALLENGER | |
| dodge vehicles | |
| challenger | |
| rear wheel drive vehicles | |
| sports cars | |
| muscle cars | |
| convertibles | |
| coupes | |
| 1970s automobiles | |
| 1980s automobiles | |
| 2000s automobiles | |
| 1970 introductions | |
| SHOPPER'S DELIGHT | |
|
Dodge Challenger was the name of two different Automobile models marketed by the Dodge division of the Chrysler Corporation in the 1970s. FIRST MODEL (1970-1974) The first Challenger was the division's late entrant to the Pony Car market segment in the United States , launched for the 1970 Model Year . It was strongly based on the similar Plymouth Barracuda 's new '' E-body '' but with two inches (51 mm) of extra Wheelbase and somewhat different outer sheetmetal. Exterior design was done by Carl "CAM'" Cameron, whom also did the exterior for the 1966 Dodge Charger . For the 1970 Challenger grille, CAM' based it off of an older sketch of his of a '66 Charger prototype that was designed to have a turbine engine. The Charger never got the turbine, but the Challenger got that car's grille. Although the Challenger was well-received by the public (with 80,000 sales in 1970 alone), it was criticized by the press, and the pony car segment was already declining by the time the Challenger arrived. Challenger production ceased after the 1974 model year, only having lasted five years; performance dropped off dramatically after the 1971 models. About 165,500 Challengers were sold over this model's lifespan. Engine choices included the following:
Performance ::
For obvious reasons, the 440 and the 426 Hemi engines were considered the most desirable, and nowadays command sizeable premiums over the smaller engines. Challengers could either be hardtop coupes or convertibles (through 1971 only). The performance model was the R/T (Road/Track), available in both body styles; both standard and R/T hardtops could be ordered as the more luxurious SE specification, which included leather seats, a vinyl roof and a smaller 'formal' rear window. The convertible Challnger was only available as an R/T in 1970. A 1970 hardtop R/T was featured in the 1971 film '' Vanishing Point '', starring Barry Newman. In 1972, Dodge dropped the R/T badging and now called it "Rallye". Other options, as well as engines and manual transmission, included steeper rear axle ratios, a limited-slip differential, and a Shaker Hood Scoop were gone for 1972. A 1970-only model was the Dodge Challenger T/A (Trans Am) racing homologation car, which used a specially tuned Six-Pack version of the 340 in³ (5.6 L) powerplant, topped with a giant hood scoop on a fiberglass hood. 'Megaphone' exhaust outlets were fitted in front of the rear wheels. These cars came standard with front and rear sway bars to enhance handling. Unusually, different-sized wheels were fitted front and back, with very fat rubber on the rear. The T/A also came with a rear ducktail spoiler and front ground effect spoilers as standard equipment. By 1972, maximum power was down to 240 hp, and production stopped in 1974. Although the body style remained the same throughout the 5 year run, there were two notable changes to the front grille. 1971 models had a more stylized "split" grille, and the final manipulation coming in 1972, with the incorporation of the "sad-mouth" design. With this change to the front end, 1972 through '74 Models had little to no variation. The only way to properly distinguish said models is by the front and rear "bumperettes" which exponentially increased in size during each consecutive year. These changes were made to meet US regulations regarding crash test safety. . The 1970 tail light went all the way across the back of the car, with the backup light in the middle of the rear. In 1971, the backup lights were on the left and right instead of the middle. The tail light array also changed for the 72-74 model years, with the challenger now having four individual lights similar to the mid-size Mercurys of the time. As the Chrysler E body line reaches legendary proportions, so too do the prices to buy these sleek machines. 1970 and 71 model years tend to generate more attention from potential (and usually deep pocketed) buyers, as the performance and style options had not yet been toned down. However, with the popularity of these vehicles on the increase, coupled with the number of useable and restorable Challengers being on the decrease, many collectors have begun looking towards the later models to create their own customizable dream machines. Indeed, many "clones" of the more visceral '70 and '71 model Challengers have been created by using 72 through 74 model year donors; The front and rear grilles/bumpers on these vehicles are easily interchangeable. However, the tail panel is not so easy to change, since the 70 and 71 tail panels are quite different than the 72-74 models. Although today they are considered one of the most sought-after muscle cars of all time, after 1970 the Challenger never successfully competed with rival offerings from Ford and General Motors. The rarity of specific models and combinations today is primarily the result of low buyer interest and production at the time SECOND MODEL (1978-1983) See Mitsubishi Sapporo for more information The Challenger name was revived in 1978 for a version of the early Mitsubishi Galant Lambda Coupe, also sold overseas as the Mitsubishi Sapporo , sold through Dodge dealers as a Captive Import and identical except in color and minor trim to the Plymouth Sapporo . Although mechanically identical, the Dodge version emphasized sportiness, with bright colors and tape stripes, and the Plymouth on luxury with more subdued trim. Both cars were sold until 1983 . The car retained the frameless hardtop styling of the old Challenger, but had only a four-cylinder engine and was a long way in performance from its namesake. Nevertheless, it acquired a reputation as a reasonably brisk performer of its type, not least because of its available 2.6 L engine, exceptionally large for a four-cylinder. Four-cylinder engines of this size had not usually been built due to inherent vibration, but Mitsubishi pioneered the use of Balance Shaft s to help damp this out and the Challenger was one of the first vehicles to bring this technology to the American market; it has since been licensed to many other manufacturers. 2008 A new " Retro " Dodge Challenger concept vehicle was introduced at the 2006 North American International Auto Show . Should this model be produced, it would be introduced on the Chrysler LY platfrom, the next generation of the Chrysler LX Platform in 2008 . The Rear Wheel Drive performance Coupe would be a direct competitor to the hugely-successful Ford Mustang , as well as a potential future Chevrolet Camaro . The concept uses a shortened LX platform, has the 6.1 L(392in³) '' Hemi '' V8 coupled to a manual transmission, and borrows many styling cues from the original 1970 model. Should the car be built, the Challenger would be made in limited numbers on the same line as the Dodge Charger , Chrysler 300C , and Dodge Magnum , partly as a test of the same flexible manufacturing system that allows the Jeep Commander and Jeep Grand Cherokee to be built on the same line, one after the other (instead of in batches). POPULAR CULTURE Film appearances
Music videos
SEE ALSO
REFERENCES EXTERNAL LINKS ''First Generation''
''Second Generation''
''New Dodge Challenger''
|