Information AboutVoodoo 2 |
|
The Voodoo 2 was a Graphics Processing Unit (GPU) made by 3dfx . The Voodoo2 was released in February 1998 as a replacement for the '''Voodoo1'''. The Voodoo2 boosted the core clock-rate from 50MHz to 90MHz, increased the memory bus from 128-bit to 192-bit, and increased texture and framebuffer memory support (up to 8 MB texture / 4 MB frame buffer compared to the Voodoo's 4 MB texture / 2 MB frame buffer.) The larger framebuffer supported a maximum screen resolution of 800x600, while the increased texture-memory allowed more detailed textures. In a seeming contradiction of Moore's Law , Voodoo2 had an increased chip-count (of 3) compared to the two-chip Voodoo1. Competing products such as the ATI Rage Pro, NVIDIA Riva 128, and Rendition Verite2200 were single-chip products with integrated 2D/VGA cores. The Voodoo2's third chip was a second TMU (texture map unit), which allowed a second texture to be drawn during the same pass, with no performance penalty. At time of introduction, Voodoo 2 was the only 3D-card capable of single-cycle dual-texturing. Of course, usage of the Voodoo2's second TMU depended on application software; Quake II exploited dual-texturing to great effect. The Voodoo2 also inherited the Voodoo 1's usage model: it was a strictly 3D-only card and required the same external pass-through cabling familiar to owners of the Voodoo 1. Finally, the Voodoo2 introduced ''Scan-Line Interleave'' (SLI) capability to the consumer PC market. (The Voodoo1 also had SLI capability, but it was only used in the arcade and professional markets.) In SLI-mode, two Voodoo boards were installed in a PC and ran in parallel, with each unit drawing half the lines of the display. Voodoo2 SLI not only doubled rendering throughput, but also increased the maximum supported screen-resolution to a then-impressive 1024×768. In 1999, 3DFX released the Voodoo 3, which effectively replaced the Voodoo 2 as the company's top-performing product. The Voodoo 3 was essentially a Voodoo 2 SLI on a single board with the addition of the 2D unit from the failed Banshee. SPECIFICATIONS
|
|
|