| Materials Recovery Facility (mrf) |
Article Index for Materials |
Website Links For Materials |
Information AboutMaterials Recovery Facility (mrf) |
| CATEGORIES ABOUT MATERIALS RECOVERY FACILITY | |
| environmental engineering | |
| waste treatment technology | |
| recycling | |
|
A clean MRF accepts Recyclable materials that have been source separated from municipal solid waste generated by either residential or commercial sources. There are a variety of clean MRF's. The most common currently are 2-stream MRF's, where source-separated recyclables are delivered in the form of a mixed food and beverage container stream (typically glass, Steel , Aluminum , PET and HDPE [No.2 plastics) and a mixed paper stream. The composition of the mixed paper stream can vary considerably, depending on the marketing arrangements that are available to the MRF operator. A typical mixed paper stream will consist of old newspapers with their inserts, old magazines and kraft (brown) paper bags. Some MRF's are able to handle a mixed paper stream consisting of a wider variety of paper types that includes old corrugated, junk mail, telephone books and even paperboard. A dirty MRF accepts a mixed solid waste stream and then proceeds to separate out designated recyclable materials through a combination of manual and machine-assisted sorting. The sorted recyclable materials may undergo further processing required to meet technical specifications established by end-markets while the balance of the mixed waste stream is sent to a disposal facility such as a landfill. The percentage of residuals (unrecoverable recyclable or non-program materials) from a properly operated clean MRF supported by an effective public outreach and education program should not exceed 10% by weight of the total delivered stream and in many cases it can be significantly below 5%. A dirty MRF recovers between five and 45 percent of the incoming material as recyclables, then the remainder is landfilled or otherwise disposed. |
|
|