| Jim Bede |
Article Index for Jim |
Website Links For Jim |
Information AboutJim Bede |
| CATEGORIES ABOUT JIM BEDE | |
| year of birth missing | |
| living people | |
| people from cleveland | |
| aviation inventors | |
|
BEDE AVIATION Bede was born in Cleveland, Ohio , and studied Aeronautical Engineering at Wichita State University , graduating in 1958. He started work as a performance engineer with North American Aviation that year, where he worked on the F4J and A3J projects for the US Navy . He stayed at North American only briefly, returning home to Cleveland in 1961 to form Bede Aviation with his father James, in order to produce a kitbuilt aircraft of his design, the BD-1 . At the time, as it is today, the General Aviation market was priced beyond the means of the average consumer. Bede felt the way to solve this problem was to have the prospective pilot build their own aircraft, as labor costs were a major part of the overall price of a delivered aircraft. The BD-1 was a simple and fairly conventional low-wing two-seat design that used some of the latest techniques in aircraft construction that larger companies such as Cessna generally ignored. The fuselage was built primarily of aluminum honeycomb adhesively bonded together instead of riveted. This not only made the plane light, but also very strong; it was to be fully aerobatic and stressed to 9''g''. Performance would likewise be excellent, estimated at 130 knots (240 km/h) with a 100 hp engine, compared to a Cessna 150 which reached about 90 knots with a similar engine. In order to make the plane more practical for the average owner, the wings could be folded and the aircraft towed behind a car, allowing it to be stored at home in a garage and towed to the airport. The kit, including a rebuilt 65hp engine, would list for US$ 2,500. Versions with more powerful engines were also offered, one with a 108 hp Lycoming O-235 listing at $4,200. Development dragged on and eventually burned through a tremendous amount of money without delivering a final design. The investors finally gave up and forced Bede to leave the company in 1966. They re-formed in 1968 as American Aviation in order to produce the design in complete form as the AA-1 ''Yankee'' . A number of changes were later introduced into the design to make it more stable, notably a larger horizontal tail, and then a more forgiving airfoil on the main wing. The AA-1 and follow-on designs became fairly popular, notably the four-seat AA-5 ''Traveller'' . The company was later purchased by Grumman , becoming '''Grumman American'''. During this time Bede also worked on a number of other designs. One of these was the XBD-2, an experimental Boundary Layer Control design based on a system designed by the Aerophysics Department of Mississippi State University . The system used 164,000 holes drilled into the surface of the wing to suck air from the Boundary Layer into the interior of the wing, thereby reducing skin friction for better peformance, as well as keeping the boundary layer "attached" over a wider variety of Angle Of Attack s and thereby increasing lift during high-angle flight and doubling maximum lift as a result. Other interesting design features were the use of two engines driving a common pusher propeller, aluminum honeycomb panels, and fibreglass landing gear struts. After 50 hours of testing the aircraft was donated to the Experimental Aircraft Association . The basic layout of the XBD-2 was also used in the BD-3 pusher design, but this did not progress beyond paper studies. An "executive version" was also designed as the BD-7, again without progressing past the early design stage. RECORD FLIGHTS AND EXPERIMENTS After being forced from what became American Aviation, Bede tried his hand at a record breaking around-the-world flight in a specially modified Schweizer 2-32 powered Glider he called the BD-2. The aircraft was modified to dramatically increase fuel tankage to 565 gallons, which included the addition of two large tanks in the fuselage, sealing the wings to turn them into tanks, and adding tankage on the wing-tips as well. It was completed in April 1966 (although other sources say 1968), and while he did not attempt its two-hop-around-the-world trip, Bede set several distance and endurance records, including a 70-hour endurance record in October 1969. This flight only ended after an electrical failure, just under 9000 miles being covered by that point. BEDE AIRCRAFT Bede remained convinced of the validity of the kit built market, and re-formed his company as Bede Aircraft. Here he started the design of an even simpler-to-build aircraft, the Bede BD-4 . The BD-4 used more conventional construction techniques, based on a simple high-wing design, and had few curved surfaces. Most of the fuselage was flat aluminum sheeting, the only major components with compound curves being the engine cowling and landing gear spats which were made of Fiberglass . One real innovation was the "panel-rib" construction which reduced building time of the wing. Basically the wing was constructed in sections consisting of a rib who's upper edge was "extended" horizontally to become one section of the wing surface as well. The wing was built up by sliding these sections together over the circular spar and fastening them together where they met. Like the BD-1, the BD-4 offered excellent performance; using the same 108 hp Lycoming O-235 as the AA-1 it could reach 130 knots. It could also be equipped with engines up to 220 hp, which was to top out at 190 knots with a 170 kt low-power cruise. The aircraft could be completed with either tricycle or tail-dragger configurations. The BD-4 first appeared in 1968 and became a "hit". Thousands of plans were sold, hundreds were built, and many are still flying today. Unfortunately the early performance estimates turned out to be overstated; even with the large engines speeds were more typically 130-150 kt. The aircraft has proven to be very strong, and has an excellent safety record. THE BD-5 Even while the BD-4 was maturing, Bede turned to a more ambitious design, the BD-5 ''Micro'' . The Micro was an extremely small one-seat design that looked more like the jet fighter than prop plane, with the pilot sitting in a semi-reclined position under a large fighter-like plexiglas canopy. The fuselage was constructed primarily from fiberglass panels over an Aluminum frame, housing a two-cylinder air-cooled 40 hp engine driving a pusher propeller. The aircraft featured retractable gear, split flaps, spoilers to slow down for landing, and a V-tail for decreased drag in cruise. Two versions were planned, the BD-5A with "short" wings tuned for high speeds, and the '''BD-5B''' with 4-ft longer wings for longer range and powered Glider use. Performance of the BD-5A was predicted to be 210 mph in cruise. All this for an introductory price of only $1,799! Although Bede had apparently first looked at the design as early as 1967, work on the BD-4 meant he was not able put any serious effort into it until about 1970. Work on a prototype started in earnest late that year, and they published an information booklet on it in early 1971. Magazine articles appeared even at this early point, most notably a very well-known article in Popular Science . On 24 February 1971 the first $200 deposit to reserve a "place in line" to receive a kit was accepted, with the target shipping date being 24 May 1972 . By the end of the year, they had over 4,000 such orders, making it one of the most popular aircraft in modern history. The prototype flew briefly on 12 September 1971 , powered by a 36 hp Polaris Industries Snowmobile engine. The stability of the aircraft with the original V-tail was marginal at best, and clearly needed a redesign. In early 1972 Bede hired Burt Rutan to take over development, and he quickly introduced a number of improvements. Most notable was a new "conventional" tail design of somewhat larger size, and a lengthened fuselage. The shorter wing also turned out to be unnecessary; the speed at which it became more efficient was very close to the aircraft's maximum speed. Spoilers and split flaps also disappeared during this period. Problems with high heat in the engine compartment forced a change to an all-metal fuselage, but this also had the positive side effect of lowering production costs in what was now becoming a huge production run. A most serious problem was the continued failure of the engines. In order to meet weight limitations the design required an engine of under 100 lbs. This wouldn't have been too much of a problem given the original goal of using a 40hp engine, but as the design matured it was realized that much more power would be needed, around 65 to 70hp. This made the use of any "off-the-shelf" Aircraft Engine basically impossible. Instead Bede selected a Two-stroke Engine which offered much better Power-to-weight Ratio s. The plane entered testing with the 440 cc Polaris design, but this was replaced with a similar one from Keikaefer Aeromarine. This engine proved to be extremely unreliable, and was itself replaced by an engine from Hirth Motoren available in 40, 65 and 70 hp versions. By this point the basic aircraft design was already long considered complete, and Bede offered the kit with the engine to follow. This was a fairly attractive option; it meant the builder could "get to work" and hopefully complete the airframe by the time the engine arrived. The price for new buyers had risen to $2,999 with the 70hp engine, which was now considered the minimum due to low performance with the original 40 hp design. Those who had sent in their deposits earlier could still pay only $1,799 and receive the smaller engine, or could pay the difference and receive the larger version. Additionally Bede decided to certify the aircraft and sell it complete as well as in kit form, taking $600 deposits for this BD-5D model. Rutan left at about this point, although stories vary as to why. The BD-5D generated even more interest, apparently receiving 6,900 deposits in the next few months. But then, unexpectedly, Hirth went bankrupt. Once again the design lacked a suitable engine, but this time the search for a replacement ended with a Xenoah design from Japan. Development of this engine was lengthy, and in the end it would not be certified for export until 1978, although this was not expected at the time. Throughout this period one of the major problems was cooling in the engine compartment, which should have been expected due to it's location out of the direct airflow around the aircraft. While the new engine was being tested, Bede decided to attempt to convert the design with a small Jet Engine , creating the BD-5J. The design was originally to use the Sermel TRS-18 , but later changed to the similar Microturbo 022 ''Cougar'' of 225 lbf thrust. Bede also moved on to design the BD-6 , a smaller BD-4 with the Hirth engine, and the "new" Bede BD-7 , a two-seat side-by-side version of the BD-5 of which a prototype was built. There was even an attempt to sidestep the engine problem with the '''BD-5S''', a Glider (S for Sailplane) version with lengthened wings and no engine, which prompted Air Progress magazine sarcastically note, ''At last, a BD-5 with no engine problems''. When 1974 came around, the engines were still not being delivered. After just under 3,000 kits had been delivered to prospective builders, the kits stopped shipping out as well. Although the company was effectively Bankrupt at this point, work on the BD-5D continued for some time. Things became official in 1979, by which point the BD-5 project was long dead. During the bankruptcy proceedings it was learned that the money ostensibly being used to build kits was instead being spent on a variety of projects. As a result, Bede entered a Consent Decree with the FTC to no longer accept deposits on aircraft for a period of ten years. Many owners abandoned their incomplete kits, but a number completed them with a variety of 3rd party engines. Over the next few years the aircraft garnered a terrible safety record. All four of the A models crashed on their first flight, with three fatalities, largely a side effect of a 100 mph landing speed combined with the tiny wheelbase. Crashes in the B models were generally due to engine failures, both due to the mix of "oddball" engines as well as endemic cooling problems. This is not the only problem; the original wing had a very sharp stall with little warning, a problem that was eventually solved by re-skinning the wing to a more forgiving profile. A rather small Center Of Gravity range was also improved by stretching the fuselage. These changes have improved the original design considerably. Today the BD-5 is a rewarding, if demanding, aircraft. Bob Bishop had purchased 20 BD-5J kits as soon as they had appeared, and many of the flying examples started life in this batch of twenty. Many of these were completed over the years, over which time the BD-5J has garnered an equally terrible safety record: almost every completed example has been involved in at least one crash. Versions from the original batch, suitably modified in a similar fashion as the prop versions, have since become a popular airshow fixture. Throughout the 1980s until 1991, Coors flew a number of them as the "Silver Bullets". Budwiser now flies a similar team. The aircraft also appeared in the opening sequence of the James Bond film, '' Octopussy ''. BEDE DESIGN After Bede Aviation collapsed, Bede took on a number of engineering projects under Bede Design. One of the first was a project with his cousin to produce a car. Simply called the Bede Car , the design used an 80hp motorcycle engine driving Ducted Fan for power. Built primarily from fiberglass on aluminum, the car was to have weighed just under 1,000 lbs, less than half that of a normal four seater built of steel. The advantage to the design was a claimed 120 mpg fuel economy, although in retrospect this seems ridiculously optimistic. Bede Industries, his cousin's company, intended to introduce the car starting in 1982, but the prototype unit proved the concept infeasible. The engine had very low power at low speeds, so low that it could not even roll up an inclined driveway for parking without "gunning" it. There was some talk of adding electric motors for low speed operation and reversing, but it is not clear if these were fitted. The fate of the prototype is unknown. Another automobile project followed, this time a smaller Motorcycle -like vehicle. The prototype was based on a production motorcycle, but "stretched" and surrounded with a fiberglass shell that looked somewhat like the BD-5. During its long gestation period it was known as the Autocycle or BD-200, and later as the LiteStar and '''Pulse'''. About 360 of these were produced and sold. During this time he was also involved with a project to build an inexpensive BD-4-based aircraft for use in Africa, but this project petered out. He also worked on new aircraft designs, including the BD-8, a single-place acrobatic aircraft. A single example was built and sold to Mike Huffman, who finished the plane and first showed it during Oshkosh exhibit of 1980. He also apparently worked on a Powered Parachute during this period. BEDE JET Within weeks of the FTC Consent Decree expiring in 1989, Bede announced the design of a new two-seat high-speed jet, the Bede BD-10 . The original idea appears to have come from a friend, Mike Van Wagenen. He formed a company specially for this project, Bede Jet at the Spirit of St. Louis Airport in Chesterfield, MO (just outside St. Louis). Having learned from the BD-5 that using a untested engine was a bad idea, he selected the smallest ''production'' engine he could find in quantity, the speeds of up to Mach 1.4. Bede's prototype was completed in 1992 and started testing, although it suffered minor damage when the gear collapsed during early testing. It was then sent to the Reno Air Races in 1994 to drum up sales, and eventually 63 $10,000 deposits were placed (according to Aviation Week And Space Technology ). The prototype also suffered wrinkling of the skin on the vertical tail, indicating inadequate strength and forcing a redesign. In further flight testing the performance estimates proved to be "optimistic". Over the design period the weight had ballooned from 1,600 lbs to 2,800 lbs and fuel tankage had to be cut, which dramatically reduced range from the original 2,000 miles to a mere 400 to 500. Speed was equally poor; even at full thrust the plane was barely able to reach the Transonic , at Mach 0.83. Skip Holm, the test pilot, left the program some time in 1993 and the project essentially ended at that point. It appears only two kits were completed. Bede had already entered an arrangement with Van Wagonen who had formed Fox 10 to help kit builders complete their planes, and in December 1993 they took over the project and reformed as '''Peregrine Flight International'''. They intended to sell completed versions of the BD-10 as the '''PJ-2'''. Military rights were sold to '''Monitor Jet''' of Canada, who intended to equip it with the Pratt & Whitney Canada JT15D engine and sell it as a basic trainer as the '''MJ-7'''. Monitor purchased the single so-far completed kit as well. Peregrine's first prototype was completed later that year, and entered testing. Although it had been modified to incorporate the stronger tail of Bede's design, it broke up mid-air on 30 December when the tail surface failed, killing Van Wagenen. The NTSB later concluded that Bede's fix was under-designed, and offered nowhere near the strength that had been calculated. Peregrine then redesigned the horizontal surfaces for a second prototype which crashed in August 1995 when one flap failed to deploy, killing the new company president, Joseph Henderson. That was enough to finally kill Peregrine. The civilian side of the design later passed to Vortex of California in 1997 when Bede Jet declared bankruptcy. Vortex intended to produce it as the PhoenixJet, but nothing ever came of this. The original prototype is currently hangered. Monitor Jet's example eventually ended up in the Toronto Aerospace Museum along with their JT-15D engine. The second completed kit broke up in mid-air in California in 2003. BEDE AIRCRAFT, AGAIN During the BD-10 project, Bede also started the design of updated BD-5's with two and four seats as the Bede BD-12 and Bede BD-14 respectively. They were designed under the reformed Bede Aircraft, also in Chesterfield. Once again deposits were accepted and held in escrow in order to hold a "place in line" for kit delivery. The introductory price for orders placed before January 1995 was $18,900 with the smallest engine. Additionally Bede signed up dealers (reportedly at $250,000) who would help customers build their planes. A considerable amount of work was put into using the latest construction techniques in order to reduce construction time; the BD-12 consisted of only a few hundred parts in total. When built at one of the sites, it was claimed the plane could be completed and flown away in two weeks. Eventually something on the order of 250 deposits were received. By early 1995 the BD-12 prototype had still not flown, and work on the BD-14 had not even started. That summer the almost-complete BD-12 was shipped to Oshkosh, where it generated some buzz. By this time the prototype ended up being seriously tail heavy, and in order to move the center of gravity back to a reasonable position for a test flight, 170 lbs of lead was added in the nose. The prototype finally flew in the fall of 1995, but was almost completely destroyed on its first flight due to marginal stability. The plane did not appear at the 1996 Oshkosh show, although it was claimed the program was continuing. Months later it became clear that Bede's company was once again in financial trouble. They were kicked out of their hanger in Chesterfield, and moved to a new space in Alton, IL. The engineers were owed considerable back pay, and work basically ended. Although the deposits were claimed to be in Escrow , it appears Bede secured a line of credit against the escrow accounts, which were then seized, leaving kit builders in the lurch again. BEDECORP Bede has once again re-formed a new design shop as BedeAmerica Aerosport. In 1998 he appeared at Oshkosh promoting a BD-16, a six-place version of the BD-4. However these plans apparently did not generate a lot of interest, and he has since moved on to the single-seat BD-17 ''Nugget'' and two-seat BD-18, both based on a layout similar to the original BD-1 but dramatically updated. The BD-17 was first announced in 2000 and was even simpler than the BD-12, consisting of only 110 parts. It entered flight testing in 2003 and proved to have excellent flight qualities. NOTES Bede re-used naming on several occasions which makes things somewhat confusing. The BD-2 name was used twice, on both the experimental boundary layer control design (XBD-2) as well as the later powered glider. BD-7 was also used twice, once for the earlier aircraft based on the XBD-2, and later for the two-seat BD-5. REFERENCES
|
|
|