European Emission Standards Article Index for
European
Website Links For
European
 

Information About

European Emission Standards




European emission standards are sets of requirements defining the acceptable limits for exhaust emissions of new vehicles sold in EU member states. The standards are defined in a series of European Union Directive s staging the progressive introduction of increasingly stringent standards. Currently, emissions of NOX , HC , Carbon Monoxide (CO), and Particulate Matter are regulated for most vehicle types, including cars, lorries, trains, tractors and similar machinery, Barge s, but excluding seagoing ships and airplanes. For each vehicle type, different standards apply. Compliance is determined by running the engine at a standardised Test Cycle . Noncompliant vehicles cannot be sold in the EU, but new standards do not apply to vehicles already on the roads. No use of specific technologies are mandated to meet the standards, though available technology is considered when setting the standards.

The stages are typically referred to as Euro 1, Euro 2, Euro 3, Euro 4 and Euro 5, or alternatively using Roman Numerals instead of numbers. However, the Directive s in which the standards are defined do not refer to them in either way.

The legal framework consists in a series of directives, each amendments to the 1970 directive 70/220/EEC {Link without Title} . Here is a summary list of the standards, when they come into force, what they apply to, and which EU directives provide the definition of the standard.

Euro 1 (1993) for passenger cars - 91/441/EEC {Link without Title} (also for passenger cars and light trucks - 93/59/EEC)

Euro 2 (1996) for passenger cars - 94/12/EC (& 96/69/EC)

Euro 3 (2000) for any vehicle - 98/69/EC

Euro 4 (2005) for any vehicle - 98/69/EC (& 2002/80/EC)

Euro 5 (2008/9) for any vehicle - (COM(2005) 683 {Link without Title} - proposed)

These limits supersede the original directive on emission limits 70/220/EEC

The classifications for vehicle types are defined by 2001/116/EC (amending Directive 70/156/EEC).


EMISSION STANDARDS FOR PASSENGER CARS


Emission standards for passenger cars and light commercial vehicles are summarized in the following tables. Since the Euro 2 stage, EU regulations introduce different emission limits for diesel and gasoline vehicles. Diesels have more stringent CO standards but are allowed higher NOx. Gasoline vehicles are exempted from PM standards through the Euro 4 stage (Euro 5 proposal introduces PM standards for lean-burning gasoline cars).

All dates listed in the tables refer to new type approvals. The EC Directives also specify a second date—one year later—which applies to first registration (entry into service) of existing, previously type-approved vehicle models.

  • ), g/km



EMISSION STANDARDS FOR LORRIES


Whereas for passenger cars, the standards are defined in g/km, for lorries (trucks) they are defined by engine power, g/kWh, and are therefore in no way comparable. The following table contains a summary of the emission standards and their implementation dates. Dates in the tables refer to new type approvals; the dates for all type approvals are in most cases one year later (EU type approvals are valid longer than one year).

The official category name is heavy-duty diesel engines, which generally includes lorries and buses.

EU Emission Standards for HD Diesel Engines, g/kWh (smoke in m-1)


SEE ALSO



SOURCES