| Chord (music) |
Article Index for Chord |
Shopping Chord |
Website Links For Chord |
Information AboutChord (music) |
|
on a Guitar in standard tuning (assuming all six strings are played).]] In Music and Music Theory , the term chord is used in several different senses. In the most general sense, the term can refer to any meaningful collection of notes that can appear simultaneously, or near-simultaneously. "Chords" in this very general sense are the subject of musical Set Theory . In more colloquial uses, the term "chord" refers to three or more different Notes or Pitches sounding simultaneously, or nearly simultaneously, over a period of time. The term is also used in an even more restricted sense, referring to tertian sonorities (see below), that can be constructed as stacks of Third s relative to some underlying Scale . Two-note sonorities are typically referred to as Dyads or Intervals . The word ''chord'' is short for ''accord'', from the Middle English word ''cord''. In the Middle Ages , Western harmony featured the perfect Intervals of a Fourth , a Fifth , and an Octave . In the 15th and 16th centuries, the major and minor triads (see below) became increasingly common, and were soon established as the default sonority for Western music. This norm persists to this day in many Western styles, though it is by no means universal. Four-note "seventh chords" have been accepted since the 17th century, and "chords" in Jazz often feature five or more notes. Since chords are a well-established norm in Western music, single-note melodies and sonorities of two pitches are often interpreted as implying chords. Chords are by no means a universal feature of human music, and many non-Western styles do not have "chords" as a Western musician would understand them. For that reason, this article will focus primarily on chords in traditional Western music. For information on non-Western styles, consult the Wikipedia articles specific to those styles. CONSTRUCTING AND NAMING CHORDS playing different Notes can create a chord.]] Every chord has certain characteristics, which include:
Number of notes The easiest way to name a chord is according to the number of pitch classes it contains. Chords with three pitch classes are called Trichord s. Chords with four notes are known as Tetrachords . Those with five are called Pentachords , and those with six are Hexachords . Type of interval See Also: Interval (music) Many chords can be arranged as a series whose elements are separated by Intervals that are all roughly the same size. For example, a C major triad contains the notes C, E, and G. These notes can be arranged in the series C-E-G, in which the first interval (C-E) is a Major Third , while the second interval (E-G) is a Minor Third . Any chord that can be arranged as a series of (major or minor) thirds is called a Tertian chord. A chord such as C-D-Eb is a series of seconds, containing a major Second (C-D) and a minor second (D-Eb). Such chords are called Secundal . The chord C-F-B, which consists of a Perfect Fourth C-F and an augmented fourth ( Tritone ) F-B is called Quartal . Most Western music uses Tertian chords. On closer examination, however, the terms "secundal", "tertian" and "quartal" can become ambiguous. The terms "second," "third," and "fourth" (and so on) are often understood relative to a scale, but it is not always clear which scale they refer to. For example, consider the pentatonic scale G-A-C-D-F. Relative to the pentatonic scale, the intervals G-C and C-F are "thirds," since there is one note between them. Relative to the chromatic scale, however, the intervals G-C and C-F are "fourths" since they are five semitones wide. For this reason the chord G-C-F might be described both as "tertian" and "quartal," depending on whether one is measuring intervals relative to the pentatonic or chromatic scales. The use of Accidentals complicates the picture. The chord B#-E-Ab is notated as a series of diminished fourths (B#-E) and (E-Ab). However, the chord is Enharmonically Equivalent to (and sonically indistinguishable from) C-E-G#, which is a series of Major Third s (C-E) and (E-G#). Notationally, then, B#-E-Ab is a "fourth chord," even though it sounds identical to the tertian chord C-E-G#. In some circumstances it is useful to talk about how a chord is notated, while in others it is useful to talk about how it sounds. Terms such as "tertian" and "quartal" can be used in either sense, and it is important to be clear about which is intended. Quality and Triads
As an example, consider an Octave of the C Major Scale , consisting of the notes C D E F G A B C. The major triad formed using the C note as the root would consist of C (the root note of the scale), E (the third note of the scale) and G (the fifth note of the scale). This triad is major because the interval from C to E is a Major Third . Using the same scale (and thus, implicitly, the key of C major) a minor chord may be constructed using the D as the root note. This would be D (root), F (third note), A (fifth note). Examination at the piano keyboard will reveal that there are four Semitone s between the root and third of the chord on C, but only 3 semitones between the root and third of the chord on D (while the outer notes are still a perfect fifth apart). Thus the C triad is major while the D triad is minor. A triad can be constructed on any note of the C major scale. These will all be either minor or major, with the exception of the triad on B, the Leading-tone (the last note of the scale before returning to a C, in this case), which is diminished. For more detail see the article on the Mathematics Of The Western Music Scale . Scale degree Chords are also distinguished and notated by the scale Degree of their Root Note or Bass Note . For example, since the first scale degree of the C major scale is the note C, a triad built on top of the note C would be called the ''one'' chord, which might be notated 1, I, or even C, in which case the assumption would be made that the Key Signature of the particular piece of music in question would indicate to the musician what function a C major triad was fulfilling, and that any special role of the chord outside of its normal diatonic function would be inferred from the context. Roman Numeral s indicate the root of the chord as a Scale Degree within a particular Key as follows: Many analysts use lower-case Roman numerals to indicate minor triads and upper-case for major ones, with degree and plus signs (o and '''+''') to indicate diminished and augmented triads, respectively. When they are not used, all the numerals are capital, and the qualities of the chords are inferred from the other scale degrees that chord contains; for example, a chord built on '''VI''' in C major would contain the notes A, C, and E, and would therefore be a minor triad. The scale to whose scale degrees the Roman numerals refer may be indicated to the left (e.g. F#:), but may also be understood from the key signature or other contextual clues. Unlike pop chord symbols, which are used as a guide to players, Roman numerals are used primarily as analytical tools, and so indications of inversions or added tones are sometimes omitted if they are not relevant to the analysis being performed. Inversion Main article: Inversion (music) . When the bass note is not the same as the root note, the chord is said to be Inverted . The number of inversions that a chord can have is one less than the number of chord members it contains. Triads, for example, (having three chord members) can have three positions, two of which are Inversion s:
COMMON CHORDS Seventh chords Main article: Seventh Chord . Seventh chords may be thought of as the next natural step in composing Tertian chords after triads. Seventh chords are constructed by adding a fourth note to a triad, at the interval of a third above the fifth of the chord. This creates the interval of a seventh above the root of the chord. There are various Types Of Seventh Chords depending on the quality of the original chord and the quality of the seventh added. Five common types of Seventh Chord s have standard symbols. The chord quality indications are sometimes superscripted and sometimes not (e.g. ''Dm7'', ''Dm7'', and ''Dm7'' are all identical). The last three chords are not used commonly except in jazz. When a dominant seventh chord is borrowed from another key, the Roman numeral corresponding with that key is shown after a slash. For example, V/V indicates the '' Dominant of the dominant''. In the key of C major, where the dominant (V) chord is G major, this Secondary Dominant is the chord on the fifth degree of the G major scale, i.e. D major. Note that while the chord built on D ('''ii''') in the key of C major would normally be a minor chord, the V/V chord, also built on D, is major. Extended chords Main article: Extended Chord . Extended chords are tertian chords (built from thirds) or triads with notes extended, or added, beyond the seventh. Thus ninth, eleventh, and thirteenth chords are extended chords. After the thirteenth, any notes added in thirds duplicate notes elsewhere in the chord, so there are no fifteenth chords, seventeenth chords, and so on. To add one note to a single triad, the equivalent simple intervals are used. Because an octave has seven notes, these are as follows: Other extended chords follow the logic of the rules shown above. Thus ''Maj9'', ''Maj11'' and ''Maj13'' chords are the extended chords shown above with major sevenths rather than dominant sevenths. Similarly, ''m9'', ''m11'' and ''m13'' have minor sevenths. Extended chords composed of triads can also have variations. Thus ''madd9'', ''m4'' and ''m6'' are minor triads with extended notes. Sixth chords Sixth chords are chords that contain any of the various intervals of a sixth as a defining characteristic. They can be considered as belonging to either of two separate groups: Group1: Chords that contain a ''sixth'' chord member, i.e., a note separated by the interval of a sixth from the chord's root, such as: 1. The major sixth chord (also called, ''sixth'' or ''added sixth'' with chord notation: 6, e.g., 'C6') This is by far the most common type of sixth chord of this group, and comprises a major chord plus a note forming the interval of a Major Sixth above the root. For example, the chord C6 contains the notes C-E-G-A. 2. The minor sixth chord (with chord notation: min 6 or m6, e.g., Cm6) This is a minor chord plus a note forming the interval of a major sixth above the root. For example, the chord Cmin6 contains the notes C-Eb-G-A In chord notation, the sixth of either chord is always assumed to be a major sixth rather than a Minor Sixth . Minor versions exist, and in chord notation this is indicated as, e.g., Cmin (min6). Such chords, however, are very rare, as the minor sixth chord member is considered an 'avoid tone' due to the semitone clash between it and the chord's fifth. 3. The Augmented Sixth Chord (usually appearing in chord notation as an enharmonically equivalent 'seventh chord') An augmented sixth chord is a chord which contains two notes that are separated by the interval of an augmented sixth (or, by inversion, a diminished third - though this inversion is rare in compositional practice). The augmented sixth is generally used as a dissonant interval which ''resolves'' by both notes moving outward to an octave. In Western music, the most common use of augmented sixth chords is to resolve to a dominant chord in root position (that is, a dominant triad with the root doubled to create the octave to which the augmented sixth chord resolves), or to a tonic chord in second inversion (a tonic triad with the fifth doubled for the same purpose). In this case, the tonic note of the key is included in the chord, sometimes along with an optional fourth note, to create one of the following (illustrated here in the key of C major):
Group 2: Inverted chords, in which the interval of a sixth appears above the bass note rather than the root; inversions, traditionally, being so named from their characteristic interval of a sixth from the bass. 1. Inverted major and minor chords Inverted major and minor chords may be called ''sixth'' chords. More specifically, their first and second inversions may be called ''six-three'' (6/3)and ''six-four'' (6/4) chords respectively, to indicate the intervals that the upper notes form with the bass note. Nowadays, however, this is mostly done for purposes of academic study or analysis. (see Figured Bass ) 2. The Neapolitan Sixth Chord This chord is a major triad with the lowered supertonic scale degree as its root. The chord is referred to as a "sixth" because it is almost always found in first inversion Though a technically accurate roman numeral analysis would be ♭II, it is generally labelled N6. In C major, the chord is spelled (assuming root position) D flat, F, A flat. Because it uses lowered Altered Tone s, this chord is often grouped with the borrowed chords. However, the chord is not borrowed from the parallel major or minor, and may appear in both major and minor keys. Chromatic alterations Although the third and seventh of the chord are always determined by the symbols shown above, the fifth, as well as the extended intervals 9, 11, and 13, may be altered through the use of Accidental s. These are indicated along with the corresponding number of the element to be altered. Accidentals are most often used in conjunction with dominant seventh chords. For example: "Altered" dominant seventh chords (C7alt) have a flat ninth, a sharp ninth, a diminished fifth and an augmented fifth When superscripted numerals are used, the different numbers may be listed horizontally (as shown), or vertically. Added tone chords Main article: Added Tone Chord . An added tone chord is a traditional chord with an extra "added" note, such as the commonly added sixth (above the root). This includes chords with an added second (ninth) or fourth (eleventh), or a combination of the three. These chords do not include "intervening" thirds as in an Extended Chord . Suspended chords Main article: Suspended Chord A suspended chord, or "sus chord" (sometimes improperly called sustained chord), is a chord where the second or most often the fourth is played with or replaces the third. For instance, Csus4 is C, F, and G. These chords are typically played when performing a V7-I progression without resolving the seventh of the V7. This is similar to a Suspension (hence the name), where the harmony shifts from one chord to another, but one or more notes of the first chord are held over into the second. However in a modern suspended chord the note may never resolve as is required of a classical suspension. In Jazz , sus chords are usually played as a major triad with the second in the bass, e.g. a major C with a D bass is a Dsus7. Suspended (or ''sus'') chords typically contain a triad whose third is replaced by a perfect fourth. They are indicated by Csus4. Other suspended chords, such as those which contain the second note in the scale rather than the third (''sus2''), also exist. In Common-practice Harmony this usage is called a Suspension and is always followed by the equivalent major or minor triad, but in popular music sometimes the chord is used without such a context. Borrowed chords Main article: Borrowed Chord . Borrowed chords are chords borrowed from the Parallel Minor Or Major . If the root of the borrowed chord is not in the original key, then they are named by the accidental. For instance, in major, a chord built on the parallel minor's sixth degree is a "flat six chord", written bVI. Borrowed chords are an example of Mode Mixture . If a chord is Borrowed from the Parallel Key , this is usually indicated directly (e.g. IV (minor)) or explained in a footnote or accompanying text. Polychords Polychord s are two or more chords superimposed on top of one another. See also Altered Chord , Secundal Chord , Quartal And Quintal Harmony and Tristan Chord . Guitar and pop chords Main article: Guitar Chord . All pop-music chords are assumed to be in Root Position , with the Root of the chord in the Bass . To indicate a different bass note, a slash is used, such as C/E, indicating a C major chord with an E in the bass. If the bass note is a chord member, the result is an Inverted Chord ; otherwise, it is known as a ''slash chord''. This is not to be confused with the similar-looking Secondary Dominants below. The tables above include a column showing the pop chord symbols commonly used as an abbreviated Notation using letters, numbers, and other symbols and usually written above the given Lyrics or Staff . Although these symbols are used occasionally in classical music as well, they are most common for Lead Sheet s and Fake Book s in Jazz and other popular music. Power chords Main article: Power Chord . Power chords are simple harmonies, in that they do not consist of three or more different kinds of notes, but rather two kinds. They consist of perfect fifths and fourths and lack the third scale note. Often, players double the root or fifth to create a third note, but not a third kind of note. The lack of the third scale note makes their ''quality'' ambiguous, which in layman's terms means that it is not clear whether they are major or minor in their ''flavor''. This is due to the fact that the major or minor quality of a chord is directly produced by the third or flatted third scale note. Power chords are generally played on an Electric Guitar and used extensively in many kinds of Rock Music (especially Heavy Metal Music ) where heavy amounts of Distortion are used. Distortion adds a great deal of harmonic content to an electric guitar's timbre. At high distortion levels, perfect intervals are the only intervals with enough Consonance to be clearly articulated and perceived. Even the addition of a third can cause a chord to sound unstable and dissonant. CHORD SEQUENCE Chords are commonly played in sequence, much as notes are played in sequence to form melodies. Chord Sequence s can be conceptualised either in a simplistic way, in which the Root Note s of the chords play simple melodies while tension is created and relieved by increasing and decreasing dissonance, or full attention can be paid to each note in every chord, in which case chord sequences can be regarded as multi-part Harmony of unlimited complexity. Nonchord tones and dissonance A Nonchord Tone is a Dissonant or unstable tone which is not a part of the chord that is currently playing and in most cases quickly Resolves to a chord tone. Simultaneity A chord is only the harmonic function of a group of notes, and it is unnecessary for all the notes to be played together (called forming a Simultaneity ). For example, Broken Chord s and Arpeggio s are ways of playing notes in succession so that they form chords. One of the most familiar broken chord figures is Alberti Bass . Since simultaneity is not a required feature of chords, there has been some academic dicussion regarding the point at which a group of notes can be called a ''chord''. Jean-Jacques Nattiez (1990, p.218) explains that, "we can encounter 'pure chords' in a musical work," such as in the "Promenade" of Modest Mussorgsky 's '' Pictures At An Exhibition ''. However, "often, we must go from a textual given to a more ''abstract'' representation of the chords being used," as in Claude Debussy's ''Premiere Arabesque'' where the chords on the second stave are abstracted from the actual notes written on the first. "For a sound configuration to be recognized as a chord, it must have a certain duration." Goldman (1965, p.26) elaborates: "the sense of harmonic relation, change, or effect depends on ''speed'' (or tempo) as well as on the relative duration of single notes or triadic units. Both absolute time (measurable length and speed) and relative time (proportion and division) must at all times be taken into account in harmonic thinking or analysis." REFERENCES
FURTHER READING
EXTERNAL LINKS
|
|
|