Australian 1st Armoured Division Article Index for
Australian 1st
Website Links For
Australian
 

Information About

Australian 1st Armoured Division





FORMATION


The decision to form the 1st Armoured Division was inspired by the success of mass Tank tactics in Europe during the early stages of World War II . The Australian War Cabinet approved the formation of an Armoured Division in November 1940 and 1st Armoured Division was established on July 1 , 1941 under the command of Major General John Northcott . The Australian Armoured Corps was established at the same time, with the Corps being formally gazetted on 9 July 1941 .

Upon its formation the 1st Armoured Division faced several key challenges. The formation of an armoured division involved a massive expansion of Australia's armoured forces, with the result that the great majority of the division’s officers and soldiers had to be trained from scratch in newly established armoured warfare schools. This process was greatly complicated by the tiny number of tanks which were available to the division, with the entire division having only 8 Vickers VI Light Tanks upon its formation. While the number of tanks available to the division slowly increased over 1941 and early 1942, it did not receive its full allocation of tanks until May 1942.


DEFENCE OF AUSTRALIA


Prior to the commencement of Hostilities With Japan the 1st Armoured Division had been scheduled to deploy to the Middle East where it would be fully equipped and complete its training (1st Armoured Brigade was to embark for the Middle East in December 1941 with 2nd Armoured Brigade embarking in March 1942). These plans were, however, dropped in early December 1941 when it was decided to retain the division in Australia to defend against the feared Japanese Landings On The Australian Mainland . As an emergency measure the division's armoured regiments were equipped with Bren Carriers until sufficient tanks arrived.

The 1st Armoured Division's armoured regiments were equipped with M3 Grant medium tanks and M3 Stuart light tanks in April and May 1942. Following this, the Division was concentrated in northern New South Wales where it completed its training with a series of large exercises. The division was moved to the area between Perth and Geraldton, Western Australia in January 1943 where it formed part of III Corps to counter the perceived threat of a Japanese invasion of Western Australia. Maj. Gen. Horace Robertson replaced Northcott in April 1942 upon Northcott's promotion to command the newly established II Corps .


DISBANDMENT


Due to the end of the Japanese threat to Australia and the unsuitability of large armoured formations in Jungle Warfare the 1st Armoured Division no longer had any real role by 1943. While the Division was disbanded in September 1943, its 1st Armoured Brigade and other units was retained as the independent 1st Armoured Brigade Group. This brigade group unit remained part of III Corps in Western Australia until its disbandment in September 1944.

The 4th Armoured Brigade , which was established in March 1943 and included several regiments which had previously formed part of the 1st Armoured Division, provided all the Australian armoured units which saw action from 1943 until the end of the war.


FORMER ELEMENTS OF THE 1ST ARMOURED DIVISION IN ACTION


While 1st Armoured Division never saw action, three Regiment s which had been part of the division later saw action in the South West Pacific Area .




(Other armoured units, such as the 1st Armoured Regiment, which also took part in the ( Borneo Campaign ), were Militia units which had not formed part of the 1st Armoured Division.)


ORDER OF BATTLE



Order of battle upon formation


At the time of its formation in July 1941, 1st Armoured Division consisted of:
  • Divisional Headquarters

  • 2/11 Armoured Car Regiment

  • 16 Field Regiment, Royal Australian Artillery (RAA)

  • 108 Anti-Tank Regiment, RAA

  • 2/3 Field Squadron, Royal Australian Engineers (RAE)

  • 4 Field Squadron, RAE

  • 2/1 Field Park Squadron, RAE

  • 1st Australian Armoured Brigade

  • --- 2/5 Armoured Regiment

  • --- 2/6 Armoured Regiment

  • --- 2/7 Armoured Regiment

  • 2nd Australian Armoured Brigade

  • --- 2/8 Armoured Regiment

  • --- 2/9 Armoured Regiment

  • --- 2/10 Armoured Regiment

  • Divisional Administration Troops



Order of battle upon disbandment


At the time of the Division's disbandment in September 1943 it consisted of:

  • Divisional Headquarters

  • 2nd/11 Armoured Car Regiment

  • 16 Field Regiment, RAA

  • 112 Anti-Tank Regiment, RAA

  • 1st Armoured Brigade

  • --- 2/5 Armoured Regiment

  • --- 2/7 Armoured Regiment

  • --- 2/10 Armoured Regiment

  • --- 15 Motor Regiment

  • 3rd Motor Brigade

  • --- 4 Motor Regiment

  • --- 26 Motor Regiment

  • --- 101 Motor Regiment

  • Divisional Administration Troops



1st Armoured Brigade Group


From September 1943 to September 1944 the Division’s former 1st Armoured Brigade group served as an independent brigade. In September 1943 the Brigade Group consisted of:

  • Brigade Headquarters

  • 2/1 Armoured Brigade Reconnaissance Squadron

  • 2/5 Armoured Regiment

  • 2/7 Armoured Regiment

  • 2/10 Armoured Regiment

  • 15 Motor Regiment

  • Brigade Administration Troops



REFERENCES


  • Major General R.N. Hopkins (Retired). ''Australian Armour. A History of the Royal Australian Armoured Corps 1927-1972''. Australian Government Publishing Service. 1978.



See also: Australian Armoured Units Of World War II